...
For more information about the output and configuration of the SMDR data, please contact your phone maintainer.
Configuring TIM Plus
| HTML |
|---|
<a id="info"></a>
</br> |
Configuring TIM Plus
The AGFEO AC-AS Series sends SMDR information via a serial connection. To collect the data from the serial port, you will first need to install NetPbx software,which then sends the SMDR to TIM Plus. For setup instructions, click on the link below:
...
- Click on the tab.
- Select the site configured during the setup wizards and click .
- Within the , select from the drop-down list.
- In the field, select
| Keywordmacro |
|---|
| Label | No connection required |
|---|
|
from the drop-down list. - Click on to apply the changes.
| HTML |
|---|
<br/>
<p>These instructions should assist in configuring your AGFEO AC-AS Series to
work with TIM Plus. If you are not familiar with PBX
configuration, please contact your system maintainer.</p>
<table class="confluenceTable">
<tbody>
<tr>
<th class="confluenceTh" width=158>Connection information</th>
<th class="confluenceTh">Description</th>
</tr>
<tr>
<td class="confluenceTd"><b>Connection type</b></td>
<td class="confluenceTd"><b>Serial Output: </b>
AGFEO AC-AS Series PBX sends SMDR information via a serial connection. You will need to directly connect a serial cable from the AGFEO AC-AS Series to the PC that NetPBX is installed and running on.
</td>
</tr>
<tr>
<td class="confluenceTd"><b>Cable configuration</b></td>
<td class="confluenceTd">Straight-through.
</td>
</tr>
</tbody>
</table>
<h2>Configuring TIM Plus</h2>
<p>Below you will find steps on how to configure TIM Plus to listen for SMDR data from your AGFEO AC-AS Series:</p>
<ol>
<li>Browse to TIM Plus as normal and login with your credentials.</li>
<li>Click on the <span class="button no_margin">Directory</span> tab.</li>
<li>Click on the site configured during the setup wizard and click <span class="button no_margin">Properties</span> or create a new site and click <span class="button no_margin">Properties</span>.</li>
<img class="screenshot border" src="http://www.tri-line.com/common/img/documentation/tim_plus/pbx/agfeo_1.png" alt="AGFEO" />
<li>Within the <span class="reference">Site Properties</span> window, select <span class="keyword">AGFEO</span> from the <span class="reference">PBX model</span> drop-down list.</li>
<li>In the <span class="reference">Connection method</span> field select <span class="keyword">No connection required</span> from the drop-down list.</li>
<li>Finally, click on the <span class="button no_margin">Save</span> button.</li>
</ol> |