...
Configuring your SMDR output
Below you will find instructions on how Follow the steps below to configure your Panasonic DBS Series to output SMDR data to TIM Plus. You will need to do this The configuration needs to be performed from the Operator phone:
- Press the key.
- Press the key.
- Press . You are now in to enter the
.Referencemacro Label Programming mode - Navigate to Call logging/Remote programming parameters.
- Go to Call logging-parity check and select 1 and , then press the key.
- Go to Call logging-even/odd parity and select 1 and , then press the key.
- Go to Call logging-baud rate (SMDR) and select 4 and , then press the key.
- Go to Call logging-stop bit and select 1 and , then press the key.
- Go to Call logging-data length and select 4 and , then press the key.
- Got Go to Call logging-printing selection out/in, and select 1 which will give you for the incoming and outgoing calls.
- Go to Call logging-printing selection local/long distance calls, and select 1 which will to print all outgoing calls and , then press the key.
- Press the key and your settings will be savedto save the settings.
| HTML |
|---|
<a id="Install NetPBX"></a> |
...
The NEC DXE phone system sends SMDR information via a serial connection. To collect the call logging data from the serial port and send it to TIM Plus, you will first need to install the NetPBX software. For setup instructions, click on the link below:
...
Once NetPBX is configured and collecting data, log on in to TIM Plus as usual and apply perform the following settingssteps below:
- Click on the tab.
- Select Choose the site configured during the setup wizard you want to configure and click.
Screenshotmacro Border false URL http://docs.tri-line.com:8090/download/attachments/4817095/panasonic_dbs_1.png - Within In the Site Properties window, select Panasonic DBS Series from the PBX model drop-down list.
- In the Connection method field, select No connection required from the drop-down list.
- Click on the button to apply the settings.
...