Versions Compared

Old Version 59

changes.mady.by.user Editor

Saved on

compared with

New Version 60

changes.mady.by.user Editor

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

These instructions help you configure your Aastra BP phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.

Pbxsummary
Supportfiles1Aastra BP.TDT
Supportfiles2Aastra BP.TDS
Additionaltasks3Install NetPBX
Requiredtask1Configure TIM Plus
Requiredtask3Install NetPBX
Requiredtask2Configure the SMDR output
ConnectionSerial connection
RequiredTask1Configure the SMDR output
Additionaltasks1Configure your SMDR
RequiredTask2Install NetPBX
Additionaltasks2Configure TIM Plus
RequiredTask3Configure TIM Plus

HTML
<a id="Configure the SMDR output"></a>

Configuring your SMDR output

BP firmware R12 or older

If you are using firmware older than R12, set the SMDR output to type 

Keywordmacro
LabelCIL 3
 which is a fixed format requiring no further configuration.

BP firmware R13+

If you are using firmware R13+, set the SMDR output to

Keywordmacro
LabelFlexible CIL
and configure the options as below:

Screenshotmacro
Borderfalse
URL/download/attachments/4817023/aastra_bp_1.png

HTML
<a id="Install NetPBX"></a>

Installing NetPBX

The Aastra BP phone system sends SMDR information via a serial connection. To collect the data from the serial port and send it to TIM Plus, you first need to install the NetPBXsoftware. For setup instructions, click on the link below:

Install and configure NetPBX

HTML
<a id="Configure TIM Plus"></a>

Configuring TIM Plus

Once NetPBX is configured and collecting data, log in to TIM Plus and perform the following steps:

  1. Click on the Directory tab.
  2. Choose the site you want to configure and click Properties.
    Screenshotmacro
    Borderfalse
    URL/download/attachments/4817023/aastra_bp_2.pnghttp://docs.call-logger.com:8090/download/attachments/4817023/aastra_bp_2.png
  3. In the Site Properties window, choose Aastra BP from the PBX model drop-down list.
  4. In the Connection method field, select No connection required from the drop-down list.
  5. Click on the Save button to apply the settings.