These instructions help you configure your Asterisk phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.
| Pbxsummary | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
Configuring your SMDR output
Follow these steps to enable SMDR output on your Asterisk phone system:
- Enter the Server Setup System.
- Under the section, edit the manager_custom.conf file.
Add the following lines to the file:
Code Block [CDRout] secret = cdrdeny = 0.0.0.0/0.0.0.0 permit = 10.0.0.0/255.0.0.0 permit = 192.168.0.0/255.255.0.0 permit = 212.57.232.128/255.255.255.128 read = write =- Verify and save the changes.
| HTML |
|---|
<p>These instructions should assist in configuring your Asterisk PBX to work with TIM Enterprise. If you are not familiar with PBX configuration, please contact your system maintainer.</p> <table class="confluenceTable"> <tbody> <tr> <th class="confluenceTh" width=158>Connection information</th> <th class="confluenceTh">Description</th> </tr> <tr> <td class="confluenceTd"><b>Connection type</b></td> <td class="confluenceTd">IP</td> </tr> <tr> <td class="confluenceTd"><b>IP method</b></td> <td class="confluenceTd">TIM Enterprise makes a connection to the Asterisk PBX.</td> </tr> </tbody> </table> <p>You will need to follow the below steps to enable CDR to be sent out via IP on your Asterisk PBX:</p> <ul id="table"> <li>Enter the <span class="reference">Server Setup System</span>.</li> <li>Under the <span class="button no_margin">Advanced</span> section select to edit the <span class="keyword">manager_custom.conf</span>.</li> <li>Add the following lines to the file: <span class="keyword"> |
...