These instructions help you configure your AGFEO AC-AS phone system to work with TIM Enterprise. Contact your system maintainer if you are not familiar with the configuration of your PBX.
| Pbxsummary | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
| HTML |
|---|
<a id="Configure the SMDR output"></a> |
Configuring your SMDR output
The AGFEO AC-AS Series outputs its call records via a serial connection. You need to directly connect a serial cable between your AGFEO AC-AS phone system and the PC that netpbx is installed and running on.
For more information about the output and configuration of your SMDR data, please contact your system maintainer.
| HTML |
|---|
<a id="Install NetPBX"></a> |
Installing NetPBX
The AGFEO phone system sends SMDR information via a serial connection. To collect the call logging data from the serial port and send it to TIM Enterprise, you first need to install the NetPBX software. For setup instructions, click on the link below:
| HTML |
|---|
<a id="Configure TIM Enterprise"></a> |
Configuring TIM Enterprise
Once NetPBX is configured and collecting data, log in to TIM Enterprise and perform the following steps:
- Click on the tab.
- Choose the PBX object you want to configure and click Properties.
- A new window will open. In the tab, select AGFEO AC-AS Series from the Data format list and tick the Keep a local backup of data box, as shown below:
Screenshotmacro Border false URL /download/attachments/3276849/agfeo_ac_as_1.png - In the tab, select No connection required from the Connection method list.
- Click on the button to apply the settings.
Screenshotmacro Border false URL /download/attachments/3276849/agfeo_ac_as_2.png