Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Pbxsummary
Supportfiles1 Cisco UCME - SysLog.TDT
Supportfiles2 Cisco UCME - SysLog.TDS
ConnectionSysLog connection
RequiredTask1Configure UCME to send SysLog eventsRequiredTask2Configure Cisco AXL sync
RequiredTask3RequiredTask2Configure TIM Enterprise to capture SysLog packets

...

UCME

...

to

...

send

...

SysLog

...

events

...

Configuring UCME to send SysLog events

Use Telnet to connect to the IP address of your UCME as shown below:

Screenshotmacro
Borderfalse
Shadowfalse
URL/download/attachments/12158183/cisco_ucme_4.png

Once connected, enter the following commands to enable the UCME to send SysLog events to TIM Enterprise:

StepIOS commandsDescription
1enableCauses the UCME to enter EXEC mode. Type your EXEC password if requested
2conf tEnters the global configuration mode
3aaa new-modelEnables aaa accounting mode
aaa accounting connection h323 start-stop group SysLog
gw-accounting syslog
acct-template callhistory-detail
4logging 192.168.0.1Specifies the IP address of TIM Enterprises's SysLog server, to which CDR data will be sent, e.g. 192.168.0.1
5endExits configuration mode
6wrSaves changes

RequiredTask3Configure TIM Enterprise to capture SysLog packets

HTML
<a id="Configure Cisco AXL sync"></a>

...

  1. Click on the Directory tab.
  2. Go to the Directory level where you want to sync the UCME files and add a new Directory Sync object. Enter a name for the object and click on the Add button, as shown below:
    Screenshotmacro
    Borderfalse
    URL/download/attachments/13271095/cisco_ucme_6.png
  3. Left-click on the newly-created object and select Properties.
  4. In the Directory type drop-down list, select Cisco UCME.
  5. In the Host name field, enter the IP address of your UCME.
  6. In the Host port field, enter the port number of the IOS service, e.g. 23 .
  7. In the Username field, enter the username of the IOS login that can perform synchronisation.
    Screenshotmacro
    Borderfalse
    URL/download/attachments/13271095/cisco_ucme_3.png
  8. Click on Set password button and enter the password of the IOS login that can perform synchronisation.
    Screenshotmacro
    Borderfalse
    URL/download/attachments/13271095/cisco_ucme_4.png
  9. Click on the Save button to apply the changes.
HTML
<a id="Configure UCME to send SysLog events"></a>

Configuring UCME to send SysLog events

Use Telnet to connect to the IP address of your UCME as shown below:

Screenshotmacro
Borderfalse
Shadowfalse
URL/download/attachments/12158183/cisco_ucme_4.png

Once connected, enter the following commands to enable the UCME to send SysLog events to TIM Enterprise:

StepIOS commandsDescription
1enableCauses the UCME to enter EXEC mode. Type your EXEC password if requested
2conf tEnters the global configuration mode
3aaa new-modelEnables aaa accounting mode
aaa accounting connection h323 start-stop group SysLog
gw-accounting syslog
acct-template callhistory-detail
4logging 192.168.0.1Specifies the IP address of TIM Enterprises's SysLog server, to which CDR data will be sent, e.g. 192.168.0.1
5endExits configuration mode
6wrSaves changes
HTML
<a id="Configure TIM Enterprise to capture SysLog packets"></a>

...