These instructions help you configure your Aastra/Mitel BP phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.
...
| HTML |
|---|
<a id="Configure the SMDR output"></a> |
Configuring your SMDR output
BP firmware R12 or older
If you are using firmware older than R12, set the SMDR output to type
| Keywordmacro | ||
|---|---|---|
|
BP firmware R13+
If you are using firmware R13+, set the SMDR output to
| Keywordmacro | ||
|---|---|---|
|
...
| HTML |
|---|
<a id="Install NetPBX"></a> |
Installing NetPBX
The Aastra/Mitel BP phone system sends SMDR information via a serial connection. To collect the data from the serial port and send it to TIM Plus, you first need to install the NetPBX software. For setup instructions, click on the link below:
...
| HTML |
|---|
<a id="Configure TIM Plus"></a> |
Configuring TIM Plus
Once NetPBX is configured and collecting data, log in to TIM Plus and perform the following steps:
...