Configuring a Stats Collector

...

Note
NOTE: There is no limit to the number of the Exclusions that you can have. You may choose any combination of any of the Exclusions presented in the table below.

HTML

<p>The table below explains all <p>All the possible combinations that you can have in terms of Exclusions Criteria are explained below. You can select the <span class="reference">Property</span> first, then pick an <span class="reference">Operator</span> and finally insert the <span class="reference">Value</span>.</p>

<h4>Account code</h4>

<p>Enter a numerical value corresponding to a phone number, number range or portion of phone number. If you want to raiseset an alarmexclusion when a call is made using a particular account code, enter the account code here and select <span class="keyword">equals</span> e.g. TriggerSet an alarmexclusion when any call is made with an account code "55697".</p>

<p>You can select one of the following options:</p>

<ul>
    <li><span class="keyword">Equals: </span>To find only exact matches for the account code entered</li>
    <li><span class="keyword">Does not equal: </span>To find all calls to everything except a particular account code</li>
    <li><span class="keyword">Begins with: </span>To find calls to an account code beginning with a specific series of digits</li>
    <li><span class="keyword">Does not begin with: </span>To exclude calls to account codes beginning with a specific series of digits</li>
	<li><span class="keyword">Contains: </span>To find a call where you only have a portion of the account code number</li>
    <li><span class="keyword">Does not contain: </span>To find a call where you need to exclude certain numbers or portions of numbers</li>
    <li><span class="keyword">Ends with: </span>When you want to find calls to account codes ending with a specific series of digits</li>
    <li><span class="keyword">Does not end with: </span>When you want to find calls to account codes that do not end with a specific series of digits</li>
</ul>

<p>An example of this alarmexclusion can be seen below:</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/alarm_exmpl_1.png" alt="AlarmStats point criterion example" />

<h4>Call type</h4>

<p>You can triggerset an alarmexclusion when a particular call type happens or does not happen. Simply select, <span class="keyword">equals</span> or <span class="keyword">does not equal</span> from the <span class="reference">Operator</span> list and the type of call you want to report on from the <span class="reference">Value</span> list.</p>

<p>You can select one of the following options:</p>

<ul>
    <li><span class="keyword">Equals: </span>To find only exact matches for the call type entered</li>
    <li><span class="keyword">Does not equal: </span>To find all call types except the particular one entered here</li>
</ul>

<p>You can select among the following call types:</p>

<ul>
    <li><span class="keyword">All inbound: </span> The report will produce results based on every inbound call</li>
    <li><span class="keyword">Inbound answered: </span>The report will produce results based on inbound answered calls only</li>
	<li><span class="keyword">Inbound DDI only: </span>The report will produce results based on inbound DDI (direct dial) calls only</li>
    <li><span class="keyword">Inbound transfer only: </span>The report will produce results based on inbound transferred calls only</li>
	<li><span class="keyword">Inbound missed: </span>The report will produce results based on inbound missed calls only</li>
    <li><span class="keyword">All outbound calls: </span>The report will produce results based on every outbound call</li>
    <li><span class="keyword">Outbound connected only: </span>The report will produce results based on outbound connected calls only</li>
	<li><span class="keyword">Outbound not connected only: </span>The report will produce results based on outbound calls that were not actually connected</li>
    <li><span class="keyword">Outbound operator assisted: </span>The report will produce results based on outbound calls that operator assisted</li>
	<li><span class="keyword">Tandem: </span>The report will produce results based on outbound calls that were not actually connected</li>
	<li><span class="keyword">User mobile calls: </span>The report will produce results based on tandem calls i.e. calls coming into a switch through one line and transferred out again through another</li>
	<li><span class="keyword">User SMS: </span>The report will produce results based on "user-dispatched (sent) text messages".  These types of "call" 
only come through if processing mobile billing data</li>
    <li><span class="keyword">All internal: </span>The report will produce results based on internal calls only</li>
    <li><span class="keyword">Internal answered only: </span>The report will produce results based on internal answered calls only</li>
	<li><span class="keyword">Internal not answered only: </span>The report will produce results based on internal calls that were not answered</li>
    <li><span class="keyword">Internal not connected only: </span>The report will produce results based on internal calls that were not actually connected</li>
	<li><span class="keyword">Private wire: </span>The report will produce results based calls that went over a private wire</li>
	<li><span class="keyword">Feature: </span>The report will produce results based on feature calls. A feature call is something which a user dials to obtain a specific PBX feature (such as voicemail enable/disable, group pick up, etc.) They're not really outbound calls or even internal calls, although some may be picked up as such.  A feature call can vary depending on the make/model of PBX</li>
</ul>

<p>An example of this alarmexclusion can be seen below:</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/alarm_exmpl_2.png" alt="AlarmStats point criterion example" />

<h4>Carrier</h4>

<p>Enter<p>The acarrier numericalis valuethe correspondingtariff totable aused phoneto number,cost number range or portion of phone numberthe call. IfYou youcan wantchoose to
raise set an alarmexclusion when acalls call is made using by a particular accountcarrier code, enter the account code here and select <span class="keyword">equals</span> e.g. Trigger an alarm when any call is made with an account code "55697"are made.</p>

<p>You can select one of the following options:</p>

<ul>
    <li><span class="keyword">Equals: </span>Calls equal to the value entered here e.g. all calls via BT</li>
    <li><span class="keyword">Does not equal: </span>Calls not equal to the value here e.g. all calls where BT is not the carrier</li>
</ul>

<p>An example of this alarmexclusion can be seen below:</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/alarm_exmpl_3.png" alt="AlarmStats point criterion example" />

<h4>Channel</h4>

<p>If you want to triggerset an alarmexclusion when a call is routed or not routed over a particular channel, select this Alarmcriterion.</p>

<p>You can select one of the following options:</p>

<ul>
    <li><span class="keyword">Equals: </span>Calls equal to the value of the channel entered here</li>
    <li><span class="keyword">Does not equal: </span>Calls not equal to the value of the channel entered here</li>
</ul>

<p>In order to add a value, just click on the <img class="icon" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/add_button.png" > button to add a channel.</p>

<img class="screenshot border" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/alarm_exmpl_4_1.png" alt="AlarmStats point criterion example" />

<p>The following window will appear. Drill up and down in the Directory in order to find the channel that you want to add. Then click on the green 
<img class="icon" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/tick_button.png" alt="Add Entity button" /> 
icon, as highlighted in red below.:</p>

<img class="screenshot naked" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/alarm_exmpl_4_2.png" alt="AlarmStats point criterion example" />

<p>An example of this alarmexclusion can be seen below:</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/alarm_exmpl_4_3.png" alt="AlarmStats point criterion example" />

<h4>Chargeband</h4>

<p>If you want to triggerset an alarmexclusion to advise when calls to a specific chargeband have been made use <span class="button">Chargeband</span> as your criteriacriterion. This is normally used to set Alarmexclusions for calls using expensive chargebands but can also be used to advise when calls do not use a specific chargeband.</p>

<p>You can select one of the following options:</p>

<ul>
    <li><span class="keyword">Equals: </span>...........</li>
    <li><span class="keyword">Does not equal to: </span>...............</li>
    <li><span class="keyword">Begins with: </span>..................</li>
    <li><span class="keyword">Does not begin with: </span>....................</li>
    <li><span class="keyword">Contains: </span>................</li>
    <li><span class="keyword">Does not contain: </span>..............</li>
	<li><span class="keyword">Ends with: </span>.............</li>
    <li><span class="keyword">Does not end with: </span>....................</li>
</ul>

<p>An example of this alarmexclusion can be seen below:</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/alarm_exmpl_5.png" alt="AlarmStats point criterion example" />

<h4>CLI</h4>

<p>If you want to triggerset an alarmexclusion when a call from a particular CLI appears, you simply need to select <span class="button no_margin">CLI</span> and <span class="keyword">equals</span> and type in the telephone number of the number who called. You also have the facility to enter partial numbers e.g. for Irish mobiles select <span class="keyword">Begins with</span> and type "0035386" in the <span class="reference">Value</span> field. If you wanted to exclude Irish mobiles, you would simply select <span class="keyword">Does not begin with</span>.</p>

<p>You can select one of the following options:</p>

<ul>
    <li><span class="keyword">Equals: </span>To find only exact matches</li>
    <li><span class="keyword">Does not equal to: </span>To find every call except those from that CLI</li>
    <li><span class="keyword">Begins with: </span>To find calls that begin with similar CLI numbers</li>
    <li><span class="keyword">Does not begin with: </span>To exclude calls from specific CLIs</li>
    <li><span class="keyword">Contains: </span>To find call from a CLI where you only have a portion of the number</li>
    <li><span class="keyword">Does not contain: </span>To find a call from a CLI excluding certain numbers or portions of numbers</li>
	<li><span class="keyword">Ends with: </span>To exclude CLI numbers ending with specific digits</li>
    <li><span class="keyword">Does not end with: </span>Where the CLI does not end with specific digits</li>
</ul>

<p>An example of this alarmexclusion can be seen below:</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/alarm_exmpl_6.png" alt="AlarmStats point criterion example" />

<h4>Cost</h4>

<p>Alarms<p>Exclusions can be triggeredset when pre-set cost parameters are met e.g. calls above a particular cost. For example you can triggerset an alarmexclusion for calls above £5.00.</p>

<p>You can select one of the following options:</p>

<ul>
	<li><span class="keyword">Is greater than: </span>All calls above the value entered here</li>
	<li><span class="keyword">Is less than: </span>All calls below the value entered here</li>
	<li><span class="keyword">Equals: </span>Calls equal to the value entered here</li>
	<li><span class="keyword">Does not equal to: </span>Calls not equal to the value here e.g. calls that were not free i.e. £0.00</li>
</ul>

<p>An example of this alarmexclusion can be seen below:</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/alarm_exmpl_7.png" alt="AlarmStats point criterion example" />

Note
NOTE: This alarm exclusion does not show a currency as it can be placed at the top of the directory and trigerred set regardless of currency. Alternatively if placed within a particular country, site or department, it will only trigger be valid at that point.

HTML

<h4>Destination</h4>

<p>Calls to specific destinations can be trigerred e.g. London or USA Mobile in the <span class="reference">Value</span> field. This would ensure that an alarmexclusion was triggeredset each time a call to London or a US mobile was made. Additional filtersexclusions could also be added e.g. a cost filterexclusions stating a minimum cost of $5.00.</p>

<p>You can select one of the following options:</p>

<ul>
    <li><span class="keyword">Equals: </span>To find only exact matches for this actual destination</li>
    <li><span class="keyword">Does not equal to: </span>To exclude calls that don't match this destination</li>
	<li><span class="keyword">Begins with: </span>To find calls that begin with a similar spelling </li>
    <li><span class="keyword">Does not begin with: </span>To find calls except those that beging with a specific location spelling</li>
    <li><span class="keyword">Contains: </span>To find calls to destinations where you only have a portion of the name</li>
    <li><span class="keyword">Does not contain: </span>To find a call to destinations where you want to exclude a portions of the name</li>
	<li><span class="keyword">Ends with: </span>To exclude locations ending with specific letters</li>
    <li><span class="keyword">Does not end with: </span>To include all calls where the location does not end with specific letters</li>
</ul>

<p>An example of this alarmexclusion can be seen below:</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/alarm_exmpl_8.png" alt="AlarmStats point criterion example" />

<h4>Dialled number</h4>

<p>If you want an alarmexclusion to be trigerredset when a full or partial number is dialled, simply enter the partial or full number in the <span class="reference">Value</span> field.</p>

<p>You can select one of the following options:</p>

<ul>
    <li><span class="keyword">Equals: </span>To find only exact matches</li>
    <li><span class="keyword">Does not equal to: </span>To excluding calls to a particular number or beginning with a particular sequence of numbers</li>
    <li><span class="keyword">Begins with: </span>To find calls to a particular location e.g. 00 for International</li>
    <li><span class="keyword">Does not begin with: </span>To exclude certain calls e.g. 07 for UK mobile/personal</li>
    <li><span class="keyword">Contains: </span>To find a call where you only have a portion of the number</li>
    <li><span class="keyword">Does not contain: </span>To find a call where you need to exclude certain numbers or portions of numbers</li>
	<li><span class="keyword">Ends with: </span>When you want to find calls to a specific DDI</li>
    <li><span class="keyword">Does not end with: </span>Calls to everywhere except a specific number range</li>
</ul>

<p>An example of this alarmexclusion can be seen below:</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/alarm_exmpl_9.png" alt="AlarmStats point criterion example" />

<h4>Duration</h4>

<p>If you want to triggerset an alarmexclusion when a call exceeds a certain duration, is below a certain duration, is equal to or not equal to (in seconds), then select this Alarmexclusion.</p>

<p>You can select one of the following options:</p>

<ul>
    <li><span class="keyword">Is greater than: </span>Allows you to look for calls longer than the duration entered</li>
    <li><span class="keyword">Is less than: </span>Allows you to look for calls shorter than the duration entered</li>
    <li><span class="keyword">Equals: </span>Allows you to look for calls equal to the duration shown</li>
    <li><span class="keyword">Is not equal to: </span>Allows you to look for any call that does not match the duration entered</li>
</ul>

<p>An example of this alarmexclusion can be seen below:</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/alarm_exmpl_10.png" alt="AlarmStats point criterion example" />

<h4>LCR code</h4>

<p>If you are using LCR (Least Cost Routing) and want to be informed when a call is made that doesn't use your chosen route, select <span class="button">LCR</span>, pick <span class="keyword">Does not begin with</span> and enter the preferred LCR in the <span class="reference">Value</span> field. If using more than one LCR, you may add several and comma separate.</p>

<p>You can select one of the following options:</p>

<ul>
    <li><span class="keyword">Equals: </span>To find only exact matches</li>
    <li><span class="keyword">Does not equal to: </span>To find any calls over alternative carriers</li>
    <li><span class="keyword">Begins with: </span>To find calls for a partial LCR code</li>
    <li><span class="keyword">Does not begin with: </span>To exclude calls over certain carriers</li>
    <li><span class="keyword">Ends with: </span>To exclude LCR codes ending with specific digits</li>
    <li><span class="keyword">Does not end with: </span>Where the LCR code does not end with specific digits</li>
    <li><span class="keyword">Contains: </span>To find a call on an LCR where you only have a portion of the number</li>
    <li><span class="keyword">Does not contain: </span>To find a call on an LCR excluding certain numbers or portions of numbers</li>
</ul>

<p>An example of this Statsexclusion point criterion can be seen below:</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/alarm_exmpl_11.png" alt="Stats point criterion example" />

<h4>Response time</h4>

<p>If you are concerned about response times, you can triggerset an alertexclusion to advise when response timetimes above a pre-determined duration are made.</p>

<p>You can select one of the following options:</p>

<ul>
    <li><span class="keyword">Is greater than: </span>Allows you to search for calls where the response time is longer than the number of seconds entered</li>
    <li><span class="keyword">Is less than: </span>Allows you to search for calls where the response time is below the number of seconds entered</li>
    <li><span class="keyword">Equals: </span>Allows you to search for calls where the response time equals that entered</li>
    <li><span class="keyword">Is not equal to: </span>Allows you to search for calls where the response time differs to that entered</li>
</ul>

<p>An example of this Statsexclusion point criterion can be seen below:</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/alarm_exmpl_12.png" alt="Stats point criterion example" />

<h4>Start time</h4>

<p>If you would like to pick up any calls made after a certain time e.g. out of hours, select calls after and/or before a specific start time e.g. where start time is after 20:00:00 or start time is before 07:00:00.</p>

<p>You can select one of the following options:</p>

<ul>
    <li><span class="keyword">is greater than: </span>Filter for calls that started after this time e.g. after 08:00</li>
    <li><span class="keyword">is less than: </span>Filter for calls that started before this time e.g. before 07:00</li>
    <li><span class="keyword">equals: </span>Filter for calls that started at exactly this time</li>
    <li><span class="keyword">is not equal to: </span>Filter for calls outside a particular time</li>
</ul>

<p>An example of this Statsexclusion point criterion  can be seen below:</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/alarm_exmpl_13.png" alt="Stats point criterion example" />

<h4>Trunk access code</h4>

<p>If you want to pick up calls routed or not routed over a specific trunk access code use this Alarmexclusion.</p>

<p>You can select one of the following options:</p>

<ul>
    <li><span class="keyword">Equals: </span>To find calls using only this trunk access code</li>
    <li><span class="keyword">Does not equal to: </span>To find every call that went out not using this trunk access code</li>
    <li><span class="keyword">Begins with: </span>To find calls that went out over a trunk access code that began with these digits</li>
    <li><span class="keyword">Does not begin with: </span>To find calls that went out over any trunk access code excluding those that began with the digits entered</li>
    <li><span class="keyword">Contains: </span>To find calls over any trunk access code where you only have a portion of the number</li>
    <li><span class="keyword">Does not contain: </span>To find a call over any trunk access code which does not certain numbers or portions of numbers</li>
	<li><span class="keyword">Ends with: </span>To find calls over any trunk access code ending with specific digits</li>
    <li><span class="keyword">Does not end with: </span>To find calls over any trunk access code that does not end with specific digits</li>
</ul>

<p>An example of this Statsexclusion point criterion can be seen below:</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/alarm_exmpl_14.png" alt="Stats point criterion example" />


<h4>User</h4>

<p>If you want to look at all calls for a particular user or calls for everyone except a particular user, user this alarmexclusion. Note that like all Alarmsexclusions, this can be used in conjunction with other Stats point criteria.</p>

<p>You can select one of the following options:</p>

<ul>
    <li><span class="keyword">Equals: </span>.......................</li>
    <li><span class="keyword">Does not equal to: </span>......................</li>
</ul>

<p>An example of this Statsexclusion point criterion can be seen below:</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/alarm_exmpl_15.png" alt="Stats point criterion example" />

<h4>Weekday</h4>

<p>You may add anthis Stats point criterion to include or exclude certain days of the week.</p>

<p>You can select one of the following options:</p>

<ul>
    <li><span class="keyword">Equals: </span>.......................</li>
    <li><span class="keyword">Does not equal to: </span>......................</li>
</ul>

<p>An example of this Statsexclusion point criterion can be seen below:</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/alarm_exmpl_16.png" alt="Stats point criterion example" />

<p>The example below shows an Stats point criterion set for weekends, for calls after 6 pm, where the cost is 
greater than £5 and the duration is greater than 1800 seconds (30 minutes).</p>

<img class="screenshot border" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/alarm_properties_3.png" alt="Stats point criterion properties" />

HTML

<p>The example below shows an Exclusion set for Weekends and for Internal calls.</p>

<img class="screenshot border" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/stats_collector_properties_5.png" alt="Stats Collector properties" />

<h2>Contents</h2>

<p>..............................................</p>

<img class="screenshot border" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/stats_collector_properties_6.png" alt="Stats Collector properties" />

Configuring a Stats Collector

Versions Compared

Old Version 24

New Version 25

Key