These instructions help you configure your BT Versatility to work with TIM Enterprise. Contact your system maintainer if you are not familiar with the configuration of your PBX.
| Pbxsummary |
|---|
| Supportfiles1 | BT Versatility.TDT |
|---|
| Connection | Serial connection |
|---|
| RequiredTask1 | Configure the SMDR output |
|---|
| RequiredTask2 | Install NetPBX |
|---|
| RequiredTask3 | Configure TIM Enterprise |
|---|
|
| HTML |
|---|
<a id="Configure the SMDR output"></a> |
Configuring your SMDR output
The BT Versatility outputs its SMDR data via a serial port. The default communication parameters for this serial connection are:
- Speed – 4800, 9600, 19200, 38400 or 115200 bps;
- Data - 8 bits;
- Parity - None.
The phone system has an in-built buffer to store the last 500 call records in case the receiving equipment becomes disconnected. This buffered data can be set to output to the serial port during system programming. An X-ON/X-OFF signal can be enabled to allow the Versatility to detect if a compatible device is receiving its SMDR data successfully. The Versatility can also be set to output SMDR data using restricted call logging, whereby the last four digits of any dialled number is masked out.
Follow the instructions below to configure your BT Versatility for use with TIM Enterprise:
| Screenshotmacro |
|---|
| Border | false |
|---|
| Shadow | false |
|---|
| URL | /download/attachments/4817052/bt_versatility_1.png |
|---|
|
| Screenshotmacro |
|---|
| Border | false |
|---|
| Shadow | false |
|---|
| URL | /download/attachments/4817052/bt_versatility_2.png |
|---|
|
| Screenshotmacro |
|---|
| Border | false |
|---|
| Shadow | false |
|---|
| URL | /download/attachments/4817052/bt_versatility_3.png |
|---|
|
| HTML |
|---|
<a id="Install NetPBX"></a> |
Installing NetPBX
To collect the SMDR data from the serial port and send it to TIM Enterprise, you first need to install the netpbx software. For setup instructions, click on the link below:
Install and configure NetPBX
| HTML |
|---|
<a id="Configure TIM Enterprise"></a> |
Configuring TIM Enterprise
Once NetPBX is configured and collecting data, log in to TIM Enterprise and perform the following steps:
- Click on the Directory tab.
- Locate the PBX object you want to configure in the Director, right-click on it and select Properties.
- A new window will open, displaying the general properties of your PBX object. Select BT Versatility from the Data format list and tick the
| Keywordmacro |
|---|
| Label | Keep a local backup of data |
|---|
|
box, as shown below:
| Screenshotmacro |
|---|
| Border | false |
|---|
| URL | /download/attachments/3407902/bt_versatility_1.png |
|---|
|
- Click on the Connection tab and select No connection required from the Connection method list.
- Click on the Save button to apply the settings.
| Screenshotmacro |
|---|
| Border | false |
|---|
| URL | /download/attachments/3407902/bt_versatility_2.png |
|---|
|