Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
HTML
<h2>Introduction</h2>

<p>For PBX types that report on extension to extension calls, this 
report allows you to view the split between which incoming and outgoing 
calls received or made both internally and externally.</p>

<p>If a lot of extension to extension calls are made in your 
organisation, it can be used to quickly assess the amount of internal 
versus external call traffic.</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/user_activity_1.png" alt="User activity" />

<h2>Running the report</h2>

<p>On the <span class="reference">Reports</span> screen, click on <span class="reference">User activity</span> in the reports type list, as shown below:</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/user_activity_2.png" alt="User activity" />

<p>You can tailor the report to your specific requirements by selecting the entity you'd like to apply the report to as well as the output format required. You can also limit the results by adding filters and options as detailed below: </p>

<h4>Entity</h4>

<p>The <span class="reference">Entity</span> allows you to choose which area of the directory you would 
like to report on. If you want to run a report for your entire 
organisation, you do not need to choose an entity.</p>

<p>If you want to select a specific area for reporting, click on the 
<img class="icon" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/add_button.png" alt="Add Entity button" /> 
button to get a pop-up window showing the areas of the directory you can report on.</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/reports_3.png" alt="Add Entity" />

<p>To drill up and down simply click on the hyperlinks provided, shown in 
the screenshot below as Aberdeen, Birmingham, Brighton, Cardiff etc.</p>

<img class="screenshot border" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/entity_panel_1.png" alt="Entity panel" />

<p>Once you have reached the area you would like to report on, click on the green 
<img class="icon" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/tick_button.png" alt="Add Entity button" /> 
as highlighted in red below.</p>

<img class="screenshot border" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/entity_panel_2.png" alt="Entity panel" />

<p>Alternatively if you are looking for a specific area e.g. person, 
department, site, name etc, you can just enter the name and press the 
<img class="icon" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/search_button.png" alt="Search" /> 
button as shown in the example below:</p>

<img class="screenshot border" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/entity_panel_3.png" alt="Entity panel" />

<h5>Selected Entity</h5>

<p>Once your entity you would like to report on had been selected, it will appear, as shown below:</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/selected_entity.png" alt="Selected entity" />

<h5>Delete an Entity</h5>

<p>In order to delete an entity, just select it with your mouse and click on the <img class="icon" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/red_delete_button.png"> button above it, as shown below:</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/delete_entity.png" alt="Delete entity" />
Note

NOTE: If you have restricted access, you may not be able to see the entire directory. You will need to speak to your system administrator to get access rights to other areas.

HTML
<h4>Period</h4>

<p>TIM Enterprise allows complete flexibility in the way you can select 
your Billing Periods.</p> 

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/period.png" alt="Period panel" />

<p>You have three types of period to select from. These are:</p>

<ul>
	<li><b>Preset period</b></li>
	<li><b>Last period</b></li>
	<li><b>Custom period</b></li>
</ul>
Note

NOTE: Running this report over longer periods increases the reliability of its results.

HTML
<h6>Preset period</h6>

<p>The standard Preset periods are shown below and can be selected from this simple drop-down list.</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/preset_period.png" alt="Preset period" />

<p>The built-in periods are based on a standard Gregorian calendar and are defined as follows:</p>

<table class="confluenceTable">
	<tbody>
		<tr>
			<th class="confluenceTh" width=98>Period</th>
			<th class="confluenceTh">Description</th>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Today</b></td>
			<td class="confluenceTd">The start date and end date is set to the current date. The default start time is set to <span class="keyword">00:00:00</span> and the end time to the current time.</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Yesterday</b></td>
			<td class="confluenceTd">The start date and end date is set to the current date minus one day. The start time is set to <span class="keyword">00:00:00</span> and the end time to <span class="keyword">23:59:59</span>.</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>This week</b></td>
			<td class="confluenceTd">The start date is set to the Monday of the current week, whilst the end date is set to the current day. The default start time is set to <span class="keyword">00:00:00</span> and the end time to the current time.</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Last week</b></td>
			<td class="confluenceTd">The start date is set to the last Monday, whilst the end date is set to the start date plus seven days. The start time is set to <span class="keyword">00:00:00</span> and the end time to <span class="keyword">23:59:59</span>.</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>This month</b></td>
			<td class="confluenceTd">The start date is set to the 1<span class="exponent">st</span> day of the current month and the end date to today. The default start time is set to <span class="keyword">00:00:00</span> and the end time to the current time.</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Last month</b></td>
			<td class="confluenceTd">The start date for this period is set in three stages. The day is set to <span class="keyword">01</span>, the month is set to the current month minus one, or in the case of January, 
			it is set to <span class="keyword">12</span>. The year is set to the current year, unless it is a new year, in which case the year is reduced by one. The start and end times are set to 
			<span class="keyword">00:00:00</span> and <span class="keyword">23:59:59</span> respectively.</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>This year</b></td>
			<td class="confluenceTd">The start date is set to the first day of the first month of the current year. The end date is set to today's date. The start and end times are set to <span class="keyword">00:00:00</span> and <span class="keyword">23:59:59</span> respectively.</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>All calls</b></td>
			<td class="confluenceTd">The start date is set to the date of the first call in the database, whilst the end date is set to the date of the most recent call in the database. Times are also set to the times of the first and last calls in the database.</td>
		</tr>
	</tbody>
</table>

<h6>Last period</h6>

<p>The last period allows complete flexibility, e.g. last 3 hours, last 7 days, last 2 quarters.</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/last_period.png" alt="Last period" />
Note

NOTE: We define last week from the pre-set periods as Sun-Sat of the previous week and last 7 days as the preceding 7 days.

HTML
<h6>Custom period</h6>

<p>The user defined custom period allows the user to define the exact date and time that the report is required from and to.</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/custom_period.png" alt="Custom period" />
HTML
<h4>Format</h4>

<p>This allows you to define the format of the output. Simply click on your 
preferred output format to determine whether you would like the report 
output in Web format, to PDF, CSV, as XML or Excel.</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/formats.png" alt="Formats panel" />

<p>To select, simply click on your chosen format from the list as
 shown above. Note that any report can be run several times with 
different formats selected for the output if required.</p>

<table class="confluenceTable">
	<tbody>
		<tr>
			<th class="confluenceTh" width=196>Format</th>
			<th class="confluenceTh">Description</th>
		</tr>
		<tr>
			<td class="confluenceTd"><img class="icon" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/web_icon.gif" /> <b>Web</b></td>
			<td class="confluenceTd">When a report is run, its output is displayed in the Report Output 
				window, which is a mini web-browser containing the HTML output generated
				 by the report engine. It is the common interface for all reports.  The
				 report body is shown in a window that can be panned around by using the
				 horizontal and vertical scrollbars. If the report is made up of 
				multiple pages, you can navigate it by using the <span class="button no_margin">Back</span> and <span class="button no_margin">Fwd</span> buttons at
				 the bottom.  You can print the report by pressing the <span class="button no_margin">Print</span> button, or 
				save the report to an HTML file by pressing the <span class="button no_margin">Save</span> button and choosing
				 a filename and location.
				<p>Universally-accessible, this format provides clickable column headers 
				for dynamic sorting of table data, with clean graphical charts in the 
				popular Flash format, so you can zoom into them for more detail.  Each 
				report is fully customisable - right down to the individual table 
				fields.  To view these reports, all that's needed is your favourite web 
				browser - with no need for obscure add-ons!</p>
			</td>
		</tr>
		<tr>
			<td class="confluenceTd"><img class="icon" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/pdf_icon.gif" /> <b>PDF <br/>(Portable Document Format)</b></td>
			<td class="confluenceTd">PDF is a file format created by Adobe Systems in 1993 for document 
				exchange.  PDF is used for representing two-dimensional documents in a 
				manner independent of the application software, hardware, and operating 
				system.

				<p>PDFs will run over several pages depending on the report selected. 
				Because of the nature of PDF reports, headers are fixed and not 
				selectable as in web reports above.  You may however pre-sort before 
				running or scheduling using the filters available in the <span class="reference">Options</span> 
				section. PDFs are ideal for producing reports like <span class="reference">Phone Bills</span>. PDFs 
				are ideal when distributing to colleagues inside and outside of your 
				organisation - while guaranteeing they'll look identical across all 
				operating systems when viewed on the screen or printed out.</p>
			</td>
		</tr>
		<tr>
			<td class="confluenceTd"><img class="icon" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/xml_icon.gif" /> <b>XML <br/>(Extensible Markup Language)</b></td>
			<td class="confluenceTd">XMLs purpose is to aid information systems in sharing structured data, 
				especially via the internet, to encode documents and to serialise data. XML, in combination with other standards, makes it possible to define 
				the content of a document separately from its formatting, making it easy
				 to reuse that content in other applications or for other presentation 
				environments. Most importantly, XML provides a basic syntax that can be 
				used to share information between different kinds of computers, 
				different applications, and different organizations without needing to 
				pass through many layers of conversion.

				<p>Since all reports are derived from this native format, we pack each one 
				with all the data you'd ever need, so you'll always be able to extract 
				the report data into your favourite reporting packages, such as Business
				 Objects, Crystal Reports, or even your favourite Office spreadsheet.</p>
			</td>
		</tr>
		<tr>
			<td class="confluenceTd"><img class="icon" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/csv_icon.gif" /> <b>CSV <br/>(Comma Separated Values)</b></td>
			<td class="confluenceTd">A CSV file is used for the digital storage of data structured in a table
				 of lists form, where each associated item (member) in a group is in 
				association with others also separated by the commas of its set. Each 
				line in the CSV file corresponds to a row in the table. Within a line, 
				fields are separated by commas, each field belonging to one table 
				column. CSV files are often used for moving tabular data between two 
				different computer programs, for example between a database program and a
				 spreadsheet program.

				<p>This option is ideal for interacting with your own back office systems, 
				all CSV data is fully customisable using XSLT from the report's original
				 XML format.</p>
			</td>
		</tr>
		
		<tr>
			<td class="confluenceTd"><img class="icon" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/excel_icon.gif" /> <b>Excel</b></td>
			<td class="confluenceTd">Select Excel as your preferred report format, if you would like to 
				manipulate the data and possibly integrate with data in other Excel 
				spreadsheets.
			</td>
		</tr>
	</tbody>
</table>
HTML
<h4>Filters</h4>

<p>The filters option allows you to add one or more filters to the report 
to allow you to sift through information in more detail. To add a 
filter, simply choose the relevant filter and press the <img class="icon" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/add_button.png" > button to add to the report.</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/filters_1.png" alt="Add filter" />

<p>The following window will appear, allowing you to set your report's filters:</p>

<img class="screenshot border" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/filters_4.png" alt="Add filter" />

<h5>Account code</h5>

<p>If your telephone system provides the ability to add account codes, you 
may filter by entering the account code here. If more than one account 
code needs to be entered, simply comma separate.</p>

<p>The default option is to search for calls where there is an exact match 
for the account code entered i.e. <span class="keyword">equals</span>, however you do have several 
other options as shown in the image below:</p>

<img class="screenshot naked" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/account_code_exmpl.png" alt="Account code" />

<p>You can select one of the following options:</p>

<ul>
    <li><span class="keyword">equals: </span>To find only exact matches for the account code entered</li>
    <li><span class="keyword">is not equal to: </span>To find all calls to everything except a particular account code</li>
    <li><span class="keyword">begins with: </span>To find calls to an account code beginning with a specific series of digits</li>
    <li><span class="keyword">does not begin with: </span>To exclude calls to account codes beginning with a specific series of digits</li>
    <li><span class="keyword">ends with: </span>When you want to find calls to account codes ending with a specific series of digits</li>
    <li><span class="keyword">does not end with: </span>When you want to find calls to account codes that do not end with a specific series of digits</li>
    <li><span class="keyword">contains: </span>To find a call where you only have a portion of the account code number</li>
    <li><span class="keyword">does not contain: </span>To find a call where you need to exclude certain numbers or portions of numbers</li>
</ul>

<p>To add the filter, simply choose the relevant filter and press the <span class="button">Add</span> button to add to the report.</p>

<h5>Carrier</h5>

<p>The carrier is the tariff table used to cost the call. You can choose to
 filter all calls by a particular carrier e.g. if you want to check a 
recent bill from that carrier. Alternatively, you may want to look at 
all calls not routed over a particular carrier. The Carrier filter is presented below:</p>

<img class="screenshot naked" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/carrier_exmpl.png" alt="Carrier" />

<p>You can select one of the following options:</p>

<ul>
	<li><span class="keyword">equals: </span>Calls equal to the value entered here e.g. all calls via BT</li>
	<li><span class="keyword">is not equal to: </span>Calls not equal to the value here e.g. all calls where BT is not the carrier</li>
</ul>

<p>To add the filter, simply choose the relevant filter and press the <span class="button">Add</span> button to add to the report.</p>

<h5>Cost</h5>

<p>This is the cost, if any, incurred by the call (shown in local currency). The Cost filter is presented below:</p>

<img class="screenshot naked" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/cost_exmpl.png" alt="Cost" />

<p>You can select one of the following options:</p>

<ul>
	<li><span class="keyword">is greater than: </span>All calls above the value entered here</li>
	<li><span class="keyword">is less than: </span>All calls below the value entered here</li>
	<li><span class="keyword">equals: </span>Calls equal to the value entered here</li>
	<li><span class="keyword">is not equal to: </span>Calls not equal to the value here e.g. calls that were not free i.e. 0.00</li>
</ul>

<p>To add the filter, simply choose the relevant filter and press the <span class="button">Add</span> button to add to the report.</p>

<h5>Dialled number</h5>

<p>When filtering by dialled number, enter the number you want to filter by here, including any international prefixes. The Dialled number filter is presented below:</p>

<img class="screenshot naked" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/dialled_number_exmpl.png" alt="Dialled number" />

<p>You can select one of the following options:</p>

<ul>
    <li><span class="keyword">equals: </span>To find only exact matches</li>
    <li><span class="keyword">is not equal to: </span>To excluding calls to a particular number or beginning with a particular sequence of numbers</li>
    <li><span class="keyword">begins with: </span>To find calls to a particular location e.g. 00 for International</li>
    <li><span class="keyword">does not begin with: </span>To exclude certain calls e.g. 07 for UK mobile/personal</li>
    <li><span class="keyword">ends with: </span>When you want to find calls to a specific DDI</li>
    <li><span class="keyword">does not end with: </span>Calls to everywhere except a specific number range</li>
    <li><span class="keyword">contains: </span>To find a call where you only have a portion of the number</li>
    <li><span class="keyword">does not contain: </span>To find a call where you need to exclude certain numbers or portions of numbers</li>
</ul>

<p>To add the filter, simply choose the relevant filter and press the <span class="button">Add</span> button to add to the report.</p>

<h5>LCR code</h5>

<p>If you use LCR code (Least Cost Routing), you can select the carrier you would like
 to report on here. Alternatively you can choose to exclude certain 
carriers. The LCR code filter is presented below:</p>

<img class="screenshot naked" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/lcr_code_exmpl.png" alt="LCR code" />

<p>You can select one of the following options:</p>

<ul>
    <li><span class="keyword">equals: </span>To find only exact matches</li>
    <li><span class="keyword">is not equal to: </span>To find any calls over alternative carriers</li>
    <li><span class="keyword">begins with: </span>To find calls for a partial LCR code</li>
    <li><span class="keyword">does not begin with: </span>To exclude calls over certain carriers</li>
    <li><span class="keyword">ends with: </span>To exclude LCR codes ending with specific digits</li>
    <li><span class="keyword">does not end with: </span>Where the LCR code does not end with specific digits</li>
    <li><span class="keyword">contains: </span>To find a call on an LCR where you only have a portion of the number</li>
    <li><span class="keyword">does not contain: </span>To find a call on an LCR excluding certain numbers or portions of numbers</li>
</ul>

<p>To add the filter, simply choose the relevant filter and press the <span class="button">Add</span> button to add to the report.</p>

<h5>Start time</h5>

<p>Start time is defined as the exact time of day the call started, as 
output by your telephone system. The Start time filter is presented below:</p>

<img class="screenshot naked" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/start_time_exmpl.png" alt="Start time" />

<p>You can select one of the following options:</p>

<ul>
    <li><span class="keyword">is greater than: </span>Filter for calls that started after this time e.g. after 08:00</li>
    <li><span class="keyword">is less than: </span>Filter for calls that started before this time e.g. before 07:00</li>
    <li><span class="keyword">equals: </span>Filter for calls that started at exactly this time</li>
    <li><span class="keyword">is not equal to: </span>Filter for calls outside a particular time</li>
</ul>

<p>To add the filter, simply choose the relevant filter and press the <span class="button">Add</span> button to add to the report.</p>

<h5>Call type</h5>

<p>This allows you to define the type of call you would like to report on. The Call type filter is presented below:</p>

<img class="screenshot naked" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/call_type_exmpl.png" alt="Call type" />

<p>You can select one of the following options:</p>

<ul>
    <li><span class="keyword">All inbound: </span> The report will produce results based on every inbound call</li>
    <li><span class="keyword">Inbound answered: </span>The report will produce results based on inbound answered calls only</li>
	<li><span class="keyword">Inbound DDI only: </span>The report will produce results based on inbound DDI (direct dial) calls only</li>
    <li><span class="keyword">Inbound transfer only: </span>The report will produce results based on inbound transferred calls only</li>
	<li><span class="keyword">Inbound missed: </span>The report will produce results based on inbound missed calls only</li>
    <li><span class="keyword">All outbound calls: </span>The report will produce results based on every outbound call</li>
    <li><span class="keyword">Outbound connected only: </span>The report will produce results based on outbound connected calls only</li>
	<li><span class="keyword">Outbound not connected only: </span>The report will produce results based on outbound calls that were not actually connected</li>
    <li><span class="keyword">Outbound operator assisted: </span>The report will produce results based on outbound calls that operator assisted</li>
	<li><span class="keyword">Tandem: </span>The report will produce results based on outbound calls that were not actually connected</li>
	<li><span class="keyword">User mobile calls: </span>The report will produce results based on tandem calls i.e. calls coming into a switch through one line and transferred out again through another</li>
	<li><span class="keyword">User SMS: </span>The report will produce results based on "user-dispatched [sent] text messages".  These types of "call" 
only come through if processing mobile billing data</li>
    <li><span class="keyword">All internal: </span>The report will produce results based on internal calls only</li>
    <li><span class="keyword">Internal answered only: </span>The report will produce results based on internal answered calls only</li>
	<li><span class="keyword">Internal not answered only: </span>The report will produce results based on internal calls that were not answered</li>
    <li><span class="keyword">Internal not connected only: </span>The report will produce results based on internal calls that were not actually connected</li>
	<li><span class="keyword">Private wire: </span>The report will produce results based calls that went over a private wire</li>
	<li><span class="keyword">Feature: </span>The report will produce results based on feature calls. A feature call is something which a user dials to obtain a specific PBX feature (such as voicemail enable/disable, group pick up, etc.) They're not really outbound calls or even internal calls, although some may be picked up as such.  A feature call can vary depending on the make/model of PBX</li>
</ul>

<p>Then you can define the actual type of call. e.g. to see all abandoned 
DDI calls, choose <span class="keyword">equals</span> and select <span class="keyword">Missed DDI only</span> from drop-down list.  
This will show how many channels had missed or abandoned calls at any one time.</p>

<p>To add the filter, simply choose the relevant filter and press the <span class="button">Add</span> button to add to the report.</p>

<h5>CLI</h5>

<p>This is the telephone number of the caller if presented known as CLI (Caller 
Line Identification). If you want to search for calls from a particular 
CLI or look for all calls excluding those from a specific CLI, this filter is suitable for you. 
The CLI filter is presented below:</p>

<img class="screenshot naked" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/cli_exmpl.png" alt="CLI" />

<p>You can select one of the following options:</p>

<ul>
    <li><span class="keyword">equals: </span>To find only exact matches</li>
    <li><span class="keyword">is not equal to: </span>To find every call except those from that CLI</li>
    <li><span class="keyword">begins with: </span>To find calls that begin with similar CLI numbers</li>
    <li><span class="keyword">does not begin with: </span>To exclude calls from specific CLIs</li>
    <li><span class="keyword">ends with: </span>To exclude CLI numbers ending with specific digits</li>
    <li><span class="keyword">does not end with: </span>Where the CLI does not end with specific digits</li>
    <li><span class="keyword">contains: </span>To find call from a CLI where you only have a portion of the number</li>
    <li><span class="keyword">does not contain: </span>To find a call from a CLI excluding certain numbers or portions of numbers</li>
</ul>

<p>To add the filter, simply choose the relevant filter and press the <span class="button">Add</span> button to add to the report.</p>

<h5>Destination</h5>

<p>The destination can most easily be defined as the B end of the call. 
It will change depending on the type of report being run. e.g. on an 
internal call, the destination will be the extension number or name of 
the person being dialled (if the extension number has been allocated a 
name). On an outgoing call the destination will be the name of the place
 being dialled e.g. USA, Leeds, Vodafone etc. If a location or mobile 
has been customised with an exact name, this will be shown e.g. Joe 
Bloggs mobile, ABC Corp LA office etc. This allows you to search for all
 calls except those to a specific destination. The Destination filter is presented below:</p>

<img class="screenshot naked" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/destination_exmpl.png" alt="Destination" />

<p>You can select one of the following options:</p>

<ul>
    <li><span class="keyword">equals: </span>To find only exact matches for this actual destination</li>
    <li><span class="keyword">is not equal to: </span>To exclude calls that don't match this destination</li>
	<li><span class="keyword">begins with: </span>To find calls that begin with a similar spelling </li>
    <li><span class="keyword">does not begin with: </span>To find calls except those that beging with a specific location spelling</li>
    <li><span class="keyword">ends with: </span>To exclude locations ending with specific letters</li>
    <li><span class="keyword">does not end with: </span>To include all calls where the location does not end with specific letters</li>
    <li><span class="keyword">contains: </span>To find calls to destinations where you only have a portion of the name</li>
    <li><span class="keyword">does not contain: </span>To find a call to destinations where you want to exclude a portions of the name</li>	
</ul>

<p>To add the filter, simply choose the relevant filter and press the <span class="button">Add</span> button to add to the report.</p>

<h5>Duration</h5>

<p>You may want to filter calls based on the length of time spent on a call
 i.e. call duration. The Duration filter is presented below:</p>

<img class="screenshot naked" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/duration_exmpl.png" alt="Duration" />

<p>You can select one of the following options:</p>

<ul>
    <li><span class="keyword">is greater than: </span>Allows you to look for calls longer than the duration entered</li>
    <li><span class="keyword">is less than: </span>Allows you to look for calls shorter than the duration entered</li>
    <li><span class="keyword">equals: </span>Allows you to look for calls equal to the duration shown</li>
    <li><span class="keyword">is not equal to: </span>Allows you to look for any call that does not match the duration entered</li>
</ul>

<p>To add the filter, simply choose the relevant filter and press the <span class="button">Add</span> button to add to the report.</p>

<h5>Response time</h5>

<p>This filter allows you to search and see how long it took for a call to 
be answered. The duration for response time is always in seconds. The Response time filter is presented below:</p>

<img class="screenshot naked" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/response_time_exmpl.png" alt="Response time" />

<p>You can select one of the following options:</p>

<ul>
    <li><span class="keyword">is greater than: </span>Allows you to search for calls where the response time is longer than the number of seconds entered</li>
    <li><span class="keyword">is less than: </span>Allows you to search for calls where the response time is below the number of seconds entered</li>
    <li><span class="keyword">equals: </span>Allows you to search for calls where the response time equals that entered</li>
    <li><span class="keyword">is not equal to: </span>Allows you to search for calls where the response time differs to that entered</li>
</ul>

<h5>Trunk access code</h5>

<p>This filter allows you to search for calls that used a particular trunk 
access routing code. The Trunk access code filter is presented below:</p>

<img class="screenshot naked" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/trunk_access_code_exmpl.png" alt="Trunk access code" />

<p>You can select one of the following options:</p>

<ul>
    <li><span class="keyword">equals: </span>To find calls using only this trunk access code</li>
    <li><span class="keyword">is not equal to: </span>To find every call that went out not using this trunk access code</li>
    <li><span class="keyword">begins with: </span>To find calls that went out over a trunk access code that began with these digits</li>
    <li><span class="keyword">does not begin with: </span>To find calls that went out over any trunk access code excluding those that began with the digits entered</li>
    <li><span class="keyword">ends with: </span>To find calls over any trunk access code ending with specific digits</li>
    <li><span class="keyword">does not end with: </span>To find calls over any trunk access code that does not end with specific digits</li>
    <li><span class="keyword">contains: </span>To find calls over any trunk access code where you only have a portion of the number</li>
    <li><span class="keyword">does not contain: </span>To find a call over any trunk access code which does not certain numbers or portions of numbers</li>
</ul>

<p>To add the filter, simply choose the relevant filter and press the <span class="button">Add</span> button to add to the report.</p>

<h5>Added Filters</h5>

<p>Once your filters are added, they will appear under the <span class="reference">Filters</span> section, as shown below:</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/filters_2.png" alt="Added filters" />

<h5>Delete a Filter</h5>

<p>In order to delete a filter, just select it with your mouse and click on the <img class="icon" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/red_delete_button.png"> button above it, as shown below:</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/filters_3.png" alt="Delete filter" />
Note

NOTE: You may add more than one Filters to any report.

HTML
<h4>Options</h4>

<p>Unlike Filters, Options differ depending on the report being run. Some 
reports do not have any options. Because all options are not available 
on all reports, only the options that can be used with the report 
selected will be shown. All other options will be greyed out and can not
 be selected.</p>

<img class="screenshot border" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/options_user_activity.png" alt="Options" />

<p>Upon selecting the Option, then click on the <span class="button">Add</span> button to add this option or just select the <span class="button">Close</span> button if you no longer want to include this Option.</p>

<p>A list with the available options for the User activity report can be seen below:</p>

<h5>Exclude transfers</h5>

<p>Select this option if you would like to exclude transferred calls when running a report. For example if you were running Call analysis report on incoming calls and wanted to see only how well calls were answered when first presented, you would add the <span class="reference">Exclude transfers</span> option.</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/exclude_transfers.png" alt="Exclude transfers" />

<p>As shown above, you have the following two options:</p>

<ul>
	<li><span class="keyword">Yes: </span>............</li>
	<li><span class="keyword">No: </span>............</li>
</ul>

<p>Once your option is selected, press the <span class="button">Add</span> button to add it to the report.</p>

<h5>Exclude weekends</h5>

<p>This gives you the option of excluding weekend calls from any results shown. To exclude weekend calls, simply select <span class="keyword">Yes</span> as your option.</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/exclude_weekends.png" alt="Exclude weekends" />

<p>As shown above, you have the following two options:</p>

<ul>
	<li><span class="keyword">Yes: </span>............</li>
	<li><span class="keyword">No: </span>............</li>
</ul>

<p>Once your option is selected, press the <span class="button">Add</span> button to add it to the report.</p>

<h5>Hide unused</h5>

<p>This option gives you the option of excluding unused extensions from the results shown. To exclude unused extension,
simply select <span class="keyword">Yes</span>, as shown below:</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/hide_unused.png" alt="Hide unused" />

<p>As shown above, you have the following two options:</p>

<ul>
	<li><span class="keyword">Yes: </span>............</li>
	<li><span class="keyword">No: </span>............</li>
</ul>

<p>Once your option is selected, press the <span class="button">Add</span> button to add it to the report.</p>

<h5>Sort results by</h5>

<p>When running this report, you may want to order the results to suit. You can select the criteria by which you want to order the results from the list as shown below:</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/sort_results_user_activity.png" alt="Sort results by" />

<ul class="content">
	<li><span class="keyword">Name: </span>.........................</li>
	<li><span class="keyword">Inbound ext count: </span>.....................</li>
	<li><span class="keyword">Inbound ext duration: </span>............................</li>
	<li><span class="keyword">Inbound int count: </span>.........................</li>
	<li><span class="keyword">Inbound int duration: </span>.....................</li>
	<li><span class="keyword">Outbound ext count: </span>.....................</li>
	<li><span class="keyword">Outbound ext duration: </span>............................</li>
	<li><span class="keyword">Outbound int count: </span>.........................</li>
	<li><span class="keyword">Outbound int duration: </span>.....................</li>
	<li><span class="keyword">Total calls: </span>.........................</li>
	<li><span class="keyword">Total duration: </span>.........................</li>
	<li><span class="keyword">Cost: </span>.........................</li>
</ul>

<p>Once your option is selected, press the <span class="button">Add</span> button to add it to the report.</p>

<h5>Sort order</h5>

<p>Decide if you would like the results displayed in ascending or descending order.</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/sort_order.png" alt="Sort order" />

<p>As shown above, you have the following two options:</p>

<ul>
	<li><span class="keyword">Ascending: </span>............</li>
	<li><span class="keyword">Descending: </span>............</li>
</ul>

<p>Once your option is selected, press the <span class="button">Add</span> button to add it to the report.</p>

<h5>Ignore missed</h5>

<p>You may choose to ignore missed calls below a defined time e.g. 2 seconds. Because the ring time is so short, these calls are difficult to actually answer and therefore you may not want to include in a <span class="reference">Missed calls</span> report.</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/ignore_missed.png" alt="Ignore missed" />

<p>As shown above, you have the option to insert the number of seconds above which your missed calls will be ignored.</p>

<p>Once your option is selected, press the <span class="button">Add</span> button to add it to the report.</p>

<h5>Audio only</h5>

<p>.............................................................................................................................</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/audio_only.png" alt="Audio only" />

<p>As shown above, you have the following two options:</p>

<ul>
	<li><span class="keyword">Yes: </span>............</li>
	<li><span class="keyword">No: </span>............</li>
</ul>

<p>Once your option is selected, press the <span class="button">Add</span> button to add it to the report.</p>

<h5>Notes only</h5>

<p>.............................................................................................................................</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/notes_only.png" alt="Notes only" />

<p>As shown above, you have the following two options:</p>

<ul>
	<li><span class="keyword">Yes: </span>............</li>
	<li><span class="keyword">No: </span>............</li>
</ul>

<p>Once your option is selected, press the <span class="button">Add</span> button to add it to the report.</p>

<h5>Scored only</h5>

<p>.............................................................................................................................</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/scored_only.png" alt="Scored only" />

<p>As shown above, you have the following two options:</p>

<ul>
	<li><span class="keyword">Yes: </span>............</li>
	<li><span class="keyword">No: </span>............</li>
</ul>

<p>Once your option is selected, press the <span class="button">Add</span> button to add it to the report.</p>

<h5>Added Options</h5>

<p>Once your options are added, they will appear under the <span class="reference">Options</span> section, as shown below:</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/options_2.png" alt="Added Options" />

<h5>Delete an Option</h5>

<p>In order to delete an option, just select it with your mouse and click on the <img class="icon" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/red_delete_button.png"> button above it, as shown below:</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/options_3.png" alt="Delete Options" />
Note

NOTE: You may add more than one Option to any report.

HTML
<h2>Creating the report</h2>

<p>When you have chosen a reporting period, and are happy with your selections, you have two options:</p>

<ul>
	<li>Run the report now</li>
	<li>Schedule for future delivery</li>
</ul>

<p>To choose your preferred option, select the appropriate button.</p>

<p>If you choose to run the report now, click the <span class="button">Run now</span> button, as shown below. The results will appear immediately in your
chosen format.</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/run_report.png" alt="Run report" />

<p>To schedule the report for delivery at a later date, follow the instruction given on the <a href="Schedule a report">Schedule a report</a> section.</p>

<h2>User activity - The results</h2>

<p>When selecting <span class="reference">Web</span> as the output format, this report will appear as below.</p>

<p>The Web format allows for complete flexibility when viewing any report. To view details of any filters or selection parameters used in creating this report, simply click on <span class="link">About this report</span> at the top right of the page.</p> 

<p>As with all reports, the header of the report includes the report title, any name you may have given to it, and the date and
time it was run.</p>

<p>All headers are clickable allowing you re-arrange the report layout in seconds, to sort the calls in ascending or decending order based on the header clicked.</p>

<p>The results displayed will vary depending on whether you are reporting on site, extension group or user. A selection of
results for all are shown below:</p>

<h4>Site level</h4>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/user_activity_1.png" alt="User activity" />

<p>The headers of this report are as follows:</p>

<table class="confluenceTable">
	<tbody>
		<tr>
			<th class="confluenceTh" width=110>Header</th>
			<th class="confluenceTh">Description</th>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Name</b></td>
			<td class="confluenceTd"> This column tells you which entity the data displayed refers to, e.g site, department user etc.
			</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b class="green">Inbound</b></td>
			<td class="confluenceTd">The answered calls columm is always displayed in green. It allows you to re-order the Call analysis report based on incoming call information. You can re-arrange based on any 
				of the following selection criteria:
				<ul class="table">
					<li><b><img class="icon" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/sigma.png" alt="Squiggle" />:</b> The total volume of calls received by this entity.
					</li>
					<li><b>Ext duration:</b> The total length of time spent on inbound external calls by this entity.
					</li>
					<li><b>Int duration:</b> The total length of time spent on inbound internal calls by this entity.
					</li>
				</ul>
			</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b class="blue">Outbound</b></td>
			<td class="confluenceTd">The outbound calls column is always displayed in blue. It shows the total number of calls for each half hour, the maximum, average and total duration for calls in that half hour and average 
				and total cost of calls made in that half hour. It also allows you to re-order the Call analysis report based on this outbound call information. You can re-arrange based on any of the following selection 
				criteria:
				<ul class="table">
					<li><b><img class="icon" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/sigma.png" alt="Squiggle" />:</b> The total volume of calls made by this entity.
					</li>
					<li><b>Ext duration:</b> The total length of time spent on outbound external calls by this entity.
					</li>
					<li><b>Int duration:</b> The total length of time spent on outbound internal calls by this entity.
					</li>
				</ul>
			</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Totals</b></td>
			<td class="confluenceTd">The missed calls column is always displayed as red. It allows you to re-order your call analysis detail based on whichever of the following criteria is most important: 
				<ul class="table">
					<li><b><img class="icon" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/sigma.png" alt="Squiggle" />:</b> The total number of calls handled by this entity, including all incoming and 
						outgoing both internal and external.
					</li>
					<li><b>Duration:</b> The total duration of time spent on calls by this entity.
					</li>
					<li><b>Cost:</b> The total cost of the calls for the entity appearing in this report. Please note that on multi-national sites the cost would normally be set to appear in local currency.
					</li>
				</ul>
			</td>
		</tr>
	</tbody>
</table>

<h4>Extension group level</h4>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/user_activity_3.png" alt="User activity" />

<h4>Extension level</h4>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/user_activity_4.png" alt="User activity" />

<h4>Individual user level</h4>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/user_activity_5.png" alt="User activity" />

<p><p>The headers of this level are as follows:</p></p>

<table class="confluenceTable">
	<tbody>
		<tr>
			<th class="confluenceTh" width=110>Header</th>
			<th class="confluenceTh">Description</th>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Date & Time</b></td>
			<td class="confluenceTd">Shows the date and time the calls was started.</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Source</b></td>
			<td class="confluenceTd">Details of where the call originated.</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>CLI</b></td>
			<td class="confluenceTd">Shows the caller line identity of the incoming call.</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Route</b></td>
			<td class="confluenceTd">Shows the number that was dialled, in the case of an outgoing or internal call.</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Destination</b></td>
			<td class="confluenceTd">For outgoing calls, shows the destination of the call; for other calls, shows the type of call, e.g. unanswered, abandoned, internal, feature call.</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Response</b></td>
			<td class="confluenceTd">The response field shows the length of time it took before the call was answered i.e. the response time.</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Duration</b></td>
			<td class="confluenceTd">Shows the duration of the call in hours, minutes and seconds.</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Cost</b></td>
			<td class="confluenceTd">Shows the cost of the call.</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b><img class="icon" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/recording_button.png" alt="Listen to the recording button" /></b></td>
			<td class="confluenceTd">Shows only if there is a recording associated with the call. To play, simply click on this icon.</td>
		</tr>
	</tbody>
</table>

<p>If you would like to go back and view any report for a larger section of the organisation, simply click on the appropriate link in the breadcrumb as shown below:</p>

<img class="screenshot naked" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/breadcrumb.png" alt="Breadcrumbs" />

Overview

The User Activity report provides a comprehensive summary of internal and external call activity - both inbound and outbound - for each site, group or user. It is also possible to drill down into each entity to obtain the same call information at a more detailed level.
Screenshotmacro
URL/download/attachments/2785336/user_activity_1.png

Running the report

Click on the Reports tab and select User activity from the left-hand pane. The screen displaying the parameters of the report will appear, where you can configure the entity, period, filters, options and format of the report.

Screenshotmacro
Borderfalse
URL/download/attachments/2785336/user_activity_2.png

For details about how to configure these parameters, refer to the relevant page(s) in the list below:

Creating the report

When you have configured the report's parameters, click on the Run now button to run the report immediately; alternatively, you can save the report's definition or schedule the report for future delivery.

Screenshotmacro
Borderfalse
URL/download/attachments/2785336/user_activity_3.png

The report's results

The results of the report show comprehensive call summary information - organised by call type - for the report entity you selected. By clicking on the About this report link at the top-right corner of the page, you can review any filters and options that have been applied to the report.

As with all reports produced by TIM Enterprise, each page of the report includes the following information:

  • the report's title
  • the date and time that the report was generated
  • the name of the report, if applicable

The Web format is the most interactive of all formats: all column headers are click-sortable and most graphical and tabular elements can be drilled down into, allowing deeper analysis of your results.

Results are shown for each organisational level: site, group and individual user, where a table is shown with the following headers:

HeaderDescription
NameThe name of the entity for each line of data

Inbound

  • SquiggleImage Added: The number of inbound answered calls, including transferred calls
  • Ext duration: The total duration of all inbound external calls (in hours, minutes and seconds)
  • Int duration: The total duration of all inbound internal calls (in hours, minutes and seconds)

Outbound

  • SquiggleImage Added: The number of outbound calls made
  • Ext duration: The total duration of all outbound external calls (in hours, minutes and seconds)
  • Int duration: The total duration of all outbound internal calls (in hours, minutes and seconds)

Totals

  • SquiggleImage Added: The total number of calls including all inbound and outbound, both internal and external
  • Duration: The total duration of time spent on all inbound and outbound calls
  • Cost: The total cost of all calls

Site level

Screenshotmacro
URL/download/attachments/2785336/user_activity_1.png

Group level

Screenshotmacro
URL/download/attachments/2785336/user_activity_4.png

Individual user level

Screenshotmacro
URL/download/attachments/2785336/user_activity_5.png

Itemised call list

When drilling down into an individual user, the report style changes to an itemised call list rather than a call summary table:

Screenshotmacro
URL/download/attachments/2785336/user_activity_6.png

The column headers of the itemised call list are as follows:

HeaderDescription
Date & TimeThe date and time the call started
SourceThe place from where the call originated
CLIThe telephone number of the remote caller for inbound calls

Route

The information displayed in this field is determined by the type of call:

  • for incoming calls, this shows the CLI of the caller
  • for incoming internal calls, this shows either the caller's username or extension number
  • for outgoing calls, this shows the dialled number

Destination

The information displayed in this field is determined by the type of call:

  • for incoming calls, this shows the name of the user whose extension answered the call, or the extension number if not available
  • for outgoing calls, this shows the geographical location that was dialled, or an alias if defined in your contacts list
  • for internal calls, this shows the extension that was dialled, enclosed in square brackets [ ]
ResponseThe length of time it took for the call to be answered (i.e. the response time)
DurationThe duration of the call (in hours, minutes and seconds)
CostThe cost of the call

To modify your report to cover a larger organisational scope, click on an element of the breadcrumb as shown below:

Screenshotmacro
Borderfalse
URL/download/attachments/9699757/breadcrumb.png