NOTE: If you have restricted access, you may not be able to see the entire directory. You will need to speak to your system administrator to get access rights to other areas.

<h4>Period</h4>

<p>TIM Enterprise allows complete flexibility in the way you can select 
your time periods.</p> 

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/period.png" alt="Period panel" />

<p>You have three types of period to select from. These are:</p>

<ul>
	<li><b>Preset period</b></li>
	<li><b>Last period</b></li>
	<li><b>Custom period</b></li>
</ul>

NOTE: Running this report over longer periods increases the reliability of its results.

<h6>Preset period</h6>

<p>The standard Preset periods are shown below and can be selected from this simple drop-down list.</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/preset_period.png" alt="Preset period" />

<p>The built-in periods are based on a standard Gregorian calendar and are defined as follows:</p>

<table class="confluenceTable">
	<tbody>
		<tr>
			<th class="confluenceTh" width=98>Period</th>
			<th class="confluenceTh">Description</th>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Today</b></td>
			<td class="confluenceTd">The start date and end date is set to the current date. The default start time is set to <span class="keyword">00:00:00</span> and the end time to the current time.</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Yesterday</b></td>
			<td class="confluenceTd">The start date and end date is set to the current date minus one day. The start time is set to <span class="keyword">00:00:00</span> and the end time to <span class="keyword">23:59:59</span>.</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>This week</b></td>
			<td class="confluenceTd">The start date is set to the Monday of the current week, whilst the end date is set to the current day. The default start time is set to <span class="keyword">00:00:00</span> and the end time to the current time.</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Last week</b></td>
			<td class="confluenceTd">This is Monday to Sunday of the previous week. The start time is set to <span class="keyword">00:00:00</span> and the end time to <span class="keyword">23:59:59</span>.</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>This month</b></td>
			<td class="confluenceTd">The start date is set to the 1<span class="exponent">st</span> day of the current month and the end date to today. The default start time is set to <span class="keyword">00:00:00</span> and the end time to the current time.</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Last month</b></td>
			<td class="confluenceTd">The start date for this period is set in three stages. The day is set to <span class="keyword">01</span>, the month is set to the current month minus one, or in the case of January, 
			it is set to <span class="keyword">12</span>. The year is set to the current year, unless it is a new year, in which case the year is reduced by one. The start and end times are set to 
			<span class="keyword">00:00:00</span> and <span class="keyword">23:59:59</span> respectively.</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>This year</b></td>
			<td class="confluenceTd">The start date is set to the first day of the first month of the current year. The end date is set to today's date. The start and end times are set to <span class="keyword">00:00:00</span> and <span class="keyword">23:59:59</span> respectively.</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>All calls</b></td>
			<td class="confluenceTd">The start date is set to the date of the first call in the database, whilst the end date is set to the date of the most recent call in the database. Times are also set to the times of the first and last calls in the database.</td>
		</tr>
	</tbody>
</table>

<h6>Last period</h6>

<p>The last period allows complete flexibility, e.g. last 3 hours, last 7 days, last 2 quarters.</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/last_period.png" alt="Last period" />

NOTE: We define last week from the pre-set periods as Sun-Sat of the previous week and last 7 days as the preceding 7 days.

<h6>Custom period</h6>

<p>The user defined custom period allows the user to define the exact date and time that the report is required from and to.</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/custom_period.png" alt="Custom period" />

<h4>Format</h4>

<p>This allows you to define the format of the output. Simply click on your 
preferred output format to determine whether you would like the report 
output in Web format, to PDF, CSV, as XML or Excel.</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/formats.png" alt="Formats panel" />

<p>To select, simply click on your chosen format from the list as
 shown above. Note that any report can be run several times with 
different formats selected for the output if required.</p>

<table class="confluenceTable">
	<tbody>
		<tr>
			<th class="confluenceTh" width=196>Format</th>
			<th class="confluenceTh">Description</th>
		</tr>
		<tr>
			<td class="confluenceTd"><img class="icon" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/web_icon.gif" /> <b>Web</b></td>
			<td class="confluenceTd">When a report is run, its output is displayed in the Report Output 
				window, which is a mini web-browser containing the HTML output generated
				 by the report engine. It is the common interface for all reports.  The
				 report body is shown in a window that can be panned around by using the
				 horizontal and vertical scrollbars. If the report is made up of 
				multiple pages, you can navigate it by using the <span class="button no_margin">Back</span> and <span class="button no_margin">Fwd</span> buttons at
				 the bottom.  You can print the report by pressing the <span class="button no_margin">Print</span> button, or 
				save the report to an HTML file by pressing the <span class="button no_margin">Save</span> button and choosing
				 a filename and location.
				<p>Universally-accessible, this format provides clickable column headers 
				for dynamic sorting of table data, with clean graphical charts in the 
				popular Flash format, so you can zoom into them for more detail.  Each 
				report is fully customisable - right down to the individual table 
				fields.  To view these reports, all that's needed is your favourite web 
				browser - with no need for obscure add-ons!</p>
			</td>
		</tr>
		<tr>
			<td class="confluenceTd"><img class="icon" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/pdf_icon.gif" /> <b>PDF <br/>(Portable Document Format)</b></td>
			<td class="confluenceTd">PDF is a file format created by Adobe Systems in 1993 for document 
				exchange.  PDF is used for representing two-dimensional documents in a 
				manner independent of the application software, hardware, and operating 
				system.

				<p>PDFs will run over several pages depending on the report selected. 
				Because of the nature of PDF reports, headers are fixed and not 
				selectable as in web reports above.  You may however pre-sort before 
				running or scheduling using the filters available in the <span class="reference">Options</span> 
				section. PDFs are ideal for producing reports like <span class="reference">Phone Bills</span>. PDFs 
				are ideal when distributing to colleagues inside and outside of your 
				organisation - while guaranteeing they'll look identical across all 
				operating systems when viewed on the screen or printed out.</p>
			</td>
		</tr>
		<tr>
			<td class="confluenceTd"><img class="icon" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/xml_icon.gif" /> <b>XML <br/>(Extensible Markup Language)</b></td>
			<td class="confluenceTd">XMLs purpose is to aid information systems in sharing structured data, 
				especially via the internet, to encode documents and to serialise data. XML, in combination with other standards, makes it possible to define 
				the content of a document separately from its formatting, making it easy
				 to reuse that content in other applications or for other presentation 
				environments. Most importantly, XML provides a basic syntax that can be 
				used to share information between different kinds of computers, 
				different applications, and different organizations without needing to 
				pass through many layers of conversion.

				<p>Since all reports are derived from this native format, we pack each one 
				with all the data you'd ever need, so you'll always be able to extract 
				the report data into your favourite reporting packages, such as Business
				 Objects, Crystal Reports, or even your favourite Office spreadsheet.</p>
			</td>
		</tr>
		<tr>
			<td class="confluenceTd"><img class="icon" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/csv_icon.gif" /> <b>CSV <br/>(Comma Separated Values)</b></td>
			<td class="confluenceTd">A CSV file is used for the digital storage of data structured in a table
				 of lists form, where each associated item (member) in a group is in 
				association with others also separated by the commas of its set. Each 
				line in the CSV file corresponds to a row in the table. Within a line, 
				fields are separated by commas, each field belonging to one table 
				column. CSV files are often used for moving tabular data between two 
				different computer programs, for example between a database program and a
				 spreadsheet program.

				<p>This option is ideal for interacting with your own back office systems, 
				all CSV data is fully customisable using XSLT from the report's original
				 XML format.</p>
			</td>
		</tr>
		
		<tr>
			<td class="confluenceTd"><img class="icon" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/excel_icon.gif" /> <b>Excel</b></td>
			<td class="confluenceTd">Select Excel as your preferred report format, if you would like to 
				manipulate the data and possibly integrate with data in other Excel 
				spreadsheets.
			</td>
		</tr>
	</tbody>
</table>

<h4>Filters</h4>

<p>The filters option allows you to add one or more filters to the report 
to allow you to sift through information in more detail. To add a 
filter, simply choose the relevant filter and press the <img class="icon" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/add_button.png" > button to add to the report.</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/filters_1.png" alt="Add filter" />

<p>The following window will appear, allowing you to set your report's filters:</p>

<img class="screenshot border" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/filters_4.png" alt="Add filter" />

<h5>Account code</h5>

<p>If your telephone system provides the ability to add account codes, you 
may filter by entering the account code here. If more than one account 
code needs to be entered, simply comma separate.</p>

<p>The default option is to search for calls where there is an exact match 
for the account code entered i.e. <span class="keyword">equals</span>, however you do have several 
other options as shown in the image below:</p>

<img class="screenshot naked" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/account_code_exmpl.png" alt="Account code" />

<p>You can select one of the following options:</p>

<ul>
    <li><span class="keyword">equals: </span>To find only exact matches for the account code entered</li>
    <li><span class="keyword">is not equal to: </span>To find all calls to everything except a particular account code</li>
    <li><span class="keyword">begins with: </span>To find calls to an account code beginning with a specific series of digits</li>
    <li><span class="keyword">does not begin with: </span>To exclude calls to account codes beginning with a specific series of digits</li>
    <li><span class="keyword">ends with: </span>When you want to find calls to account codes ending with a specific series of digits</li>
    <li><span class="keyword">does not end with: </span>When you want to find calls to account codes that do not end with a specific series of digits</li>
    <li><span class="keyword">contains: </span>To find a call where you only have a portion of the account code number</li>
    <li><span class="keyword">does not contain: </span>To find a call where you need to exclude certain numbers or portions of numbers</li>
</ul>

<p>To add the filter, simply choose the relevant filter and press the <span class="button">Add</span> button to add to the report.</p>

<h5>Carrier</h5>

<p>The carrier is the tariff table used to cost the call. You can choose to
 filter all calls by a particular carrier e.g. if you want to check a 
recent bill from that carrier. Alternatively, you may want to look at 
all calls not routed over a particular carrier. The Carrier filter is presented below:</p>

<img class="screenshot naked" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/carrier_exmpl.png" alt="Carrier" />

<p>You can select one of the following options:</p>

<ul>
	<li><span class="keyword">equals: </span>Calls equal to the value entered here e.g. all calls via BT</li>
	<li><span class="keyword">is not equal to: </span>Calls not equal to the value here e.g. all calls where BT is not the carrier</li>
</ul>

<p>To add the filter, simply choose the relevant filter and press the <span class="button">Add</span> button to add to the report.</p>

<h5>Cost</h5>

<p>This is the cost, if any, incurred by the call (shown in local currency). The Cost filter is presented below:</p>

<img class="screenshot naked" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/cost_exmpl.png" alt="Cost" />

<p>You can select one of the following options:</p>

<ul>
	<li><span class="keyword">is greater than: </span>All calls above the value entered here</li>
	<li><span class="keyword">is less than: </span>All calls below the value entered here</li>
	<li><span class="keyword">equals: </span>Calls equal to the value entered here</li>
	<li><span class="keyword">is not equal to: </span>Calls not equal to the value here e.g. calls that were not free i.e. 0.00</li>
</ul>

<p>To add the filter, simply choose the relevant filter and press the <span class="button">Add</span> button to add to the report.</p>

<h5>Dialled number</h5>

<p>When filtering by dialled number, enter the number you want to filter by here, including any international prefixes. The Dialled number filter is presented below:</p>

<img class="screenshot naked" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/dialled_number_exmpl.png" alt="Dialled number" />

<p>You can select one of the following options:</p>

<ul>
    <li><span class="keyword">equals: </span>To find only exact matches</li>
    <li><span class="keyword">is not equal to: </span>To excluding calls to a particular number or beginning with a particular sequence of numbers</li>
    <li><span class="keyword">begins with: </span>To find calls to a particular location e.g. 00 for International</li>
    <li><span class="keyword">does not begin with: </span>To exclude certain calls e.g. 07 for UK mobile/personal</li>
    <li><span class="keyword">ends with: </span>When you want to find calls to a specific DDI</li>
    <li><span class="keyword">does not end with: </span>Calls to everywhere except a specific number range</li>
    <li><span class="keyword">contains: </span>To find a call where you only have a portion of the number</li>
    <li><span class="keyword">does not contain: </span>To find a call where you need to exclude certain numbers or portions of numbers</li>
</ul>

<p>To add the filter, simply choose the relevant filter and press the <span class="button">Add</span> button to add to the report.</p>

<h5>LCR code</h5>

<p>If you use LCR code (Least Cost Routing), you can select the carrier you would like
 to report on here. Alternatively you can choose to exclude certain 
carriers. The LCR code filter is presented below:</p>

<img class="screenshot naked" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/lcr_code_exmpl.png" alt="LCR code" />

<p>You can select one of the following options:</p>

<ul>
    <li><span class="keyword">equals: </span>To find only exact matches</li>
    <li><span class="keyword">is not equal to: </span>To find any calls over alternative carriers</li>
    <li><span class="keyword">begins with: </span>To find calls for a partial LCR code</li>
    <li><span class="keyword">does not begin with: </span>To exclude calls over certain carriers</li>
    <li><span class="keyword">ends with: </span>To exclude LCR codes ending with specific digits</li>
    <li><span class="keyword">does not end with: </span>Where the LCR code does not end with specific digits</li>
    <li><span class="keyword">contains: </span>To find a call on an LCR where you only have a portion of the number</li>
    <li><span class="keyword">does not contain: </span>To find a call on an LCR excluding certain numbers or portions of numbers</li>
</ul>

<p>To add the filter, simply choose the relevant filter and press the <span class="button">Add</span> button to add to the report.</p>

<h5>Start time</h5>

<p>Start time is defined as the exact time of day the call started, as 
output by your telephone system. The Start time filter is presented below:</p>

<img class="screenshot naked" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/start_time_exmpl.png" alt="Start time" />

<p>You can select one of the following options:</p>

<ul>
    <li><span class="keyword">is greater than: </span>Filter for calls that started after this time e.g. after 08:00</li>
    <li><span class="keyword">is less than: </span>Filter for calls that started before this time e.g. before 07:00</li>
    <li><span class="keyword">equals: </span>Filter for calls that started at exactly this time</li>
    <li><span class="keyword">is not equal to: </span>Filter for calls outside a particular time</li>
</ul>

<p>To add the filter, simply choose the relevant filter and press the <span class="button">Add</span> button to add to the report.</p>

<h5>Call type</h5>

<p>This allows you to define the type of call you would like to report on. The Call type filter is presented below:</p>

<img class="screenshot naked" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/call_type_exmpl.png" alt="Call type" />

<p>You can select one of the following options:</p>

<ul>
    <li><span class="keyword">All inbound: </span> The report will produce results based on every inbound call.</li>
    <li><span class="keyword">Inbound answered: </span>The report will produce results based on inbound answered calls only.</li>
	<li><span class="keyword">Inbound DDI only: </span>The report will produce results based on inbound DDI (direct dial) calls only.</li>
    <li><span class="keyword">Inbound transfer only: </span>The report will produce results based on inbound transferred calls only.</li>
	<li><span class="keyword">Inbound missed: </span>The report will produce results based on inbound missed calls only.</li>
    <li><span class="keyword">All outbound calls: </span>The report will produce results based on every outbound call.</li>
    <li><span class="keyword">Outbound connected only: </span>The report will produce results based on outbound connected calls only.</li>
	<li><span class="keyword">Outbound not connected only: </span>The report will produce results based on outbound calls that were not actually connected.</li>
    <li><span class="keyword">Outbound operator assisted: </span>The report will produce results based on outbound calls that were operator assisted.</li>
	<li><span class="keyword">Tandem: </span>The report will produce results based on tandem calls i.e. calls coming into a switch through one line and transferred out again through another.</li>
	<li><span class="keyword">User mobile calls: </span>This report will produce results based on User mobile calls only.</li>
	<li><span class="keyword">User SMS: </span>The report will produce results based on "user-dispatched (sent) text messages".  These types of "call" 
only come through if processing mobile billing data.</li>
    <li><span class="keyword">All internal: </span>The report will produce results based on internal calls only.</li>
    <li><span class="keyword">Internal answered only: </span>The report will produce results based on internal answered calls only.</li>
	<li><span class="keyword">Internal not answered only: </span>The report will produce results based on internal calls that were not answered.</li>
    <li><span class="keyword">Internal not connected only: </span>The report will produce results based on internal calls that were not actually connected.</li>
	<li><span class="keyword">Private wire: </span>The report will produce results based calls that went over a private wire.</li>
	<li><span class="keyword">Feature: </span>The report will produce results based on feature calls. A feature call is something which a user dials to obtain a specific PBX feature (such as voicemail enable/disable, group pick up, etc.) They're not really outbound calls or even internal calls, although some may be picked up as such.  A feature call can vary depending on the make/model of PBX.</li>
</ul>

<p>Then you can define the actual type of call. e.g. to see all abandoned 
DDI calls, choose <span class="keyword">equals</span> and select <span class="keyword">Missed DDI only</span> from drop-down list.  
This will show how many channels had missed or abandoned calls at any one time.</p>

<p>To add the filter, simply choose the relevant filter and press the <span class="button">Add</span> button to add to the report.</p>

<h5>CLI</h5>

<p>This is the telephone number of the caller if presented known as CLI (Caller 
Line Identification). If you want to search for calls from a particular 
CLI or look for all calls excluding those from a specific CLI, this filter is suitable for you. 
The CLI filter is presented below:</p>

<img class="screenshot naked" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/cli_exmpl.png" alt="CLI" />

<p>You can select one of the following options:</p>

<ul>
    <li><span class="keyword">equals: </span>To find only exact matches</li>
    <li><span class="keyword">is not equal to: </span>To find every call except those from that CLI</li>
    <li><span class="keyword">begins with: </span>To find calls that begin with similar CLI numbers</li>
    <li><span class="keyword">does not begin with: </span>To exclude calls from specific CLIs</li>
    <li><span class="keyword">ends with: </span>To exclude CLI numbers ending with specific digits</li>
    <li><span class="keyword">does not end with: </span>Where the CLI does not end with specific digits</li>
    <li><span class="keyword">contains: </span>To find call from a CLI where you only have a portion of the number</li>
    <li><span class="keyword">does not contain: </span>To find a call from a CLI excluding certain numbers or portions of numbers</li>
</ul>

<p>To add the filter, simply choose the relevant filter and press the <span class="button">Add</span> button to add to the report.</p>

<h5>Destination</h5>

<p>The destination can most easily be defined as the B end of the call. 
It will change depending on the type of report being run. e.g. on an 
internal call, the destination will be the extension number or name of 
the person being dialled (if the extension number has been allocated a 
name). On an outgoing call the destination will be the name of the place
 being dialled e.g. USA, Leeds, Vodafone etc. If a location or mobile 
has been customised with an exact name, this will be shown e.g. Joe 
Bloggs mobile, ABC Corp LA office etc. This allows you to search for all
 calls except those to a specific destination. The Destination filter is presented below:</p>

<img class="screenshot naked" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/destination_exmpl.png" alt="Destination" />

<p>You can select one of the following options:</p>

<ul>
    <li><span class="keyword">equals: </span>To find only exact matches for this actual destination</li>
    <li><span class="keyword">is not equal to: </span>To exclude calls that don't match this destination</li>
	<li><span class="keyword">begins with: </span>To find calls that begin with a similar spelling </li>
    <li><span class="keyword">does not begin with: </span>To find calls except those that beging with a specific location spelling</li>
    <li><span class="keyword">ends with: </span>To exclude locations ending with specific letters</li>
    <li><span class="keyword">does not end with: </span>To include all calls where the location does not end with specific letters</li>
    <li><span class="keyword">contains: </span>To find calls to destinations where you only have a portion of the name</li>
    <li><span class="keyword">does not contain: </span>To find a call to destinations where you want to exclude a portions of the name</li>	
</ul>

<p>To add the filter, simply choose the relevant filter and press the <span class="button">Add</span> button to add to the report.</p>

<h5>Duration</h5>

<p>You may want to filter calls based on the length of time spent on a call
 i.e. call duration. The Duration filter is presented below:</p>

<img class="screenshot naked" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/duration_exmpl.png" alt="Duration" />

<p>You can select one of the following options:</p>

<ul>
    <li><span class="keyword">is greater than: </span>Allows you to look for calls longer than the duration entered</li>
    <li><span class="keyword">is less than: </span>Allows you to look for calls shorter than the duration entered</li>
    <li><span class="keyword">equals: </span>Allows you to look for calls equal to the duration shown</li>
    <li><span class="keyword">is not equal to: </span>Allows you to look for any call that does not match the duration entered</li>
</ul>

<p>To add the filter, simply choose the relevant filter and press the <span class="button">Add</span> button to add to the report.</p>

<h5>Response time</h5>

<p>This filter allows you to search and see how long it took for a call to 
be answered. The duration for response time is always in seconds. The Response time filter is presented below:</p>

<img class="screenshot naked" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/response_time_exmpl.png" alt="Response time" />

<p>You can select one of the following options:</p>

<ul>
    <li><span class="keyword">is greater than: </span>Allows you to search for calls where the response time is longer than the number of seconds entered</li>
    <li><span class="keyword">is less than: </span>Allows you to search for calls where the response time is below the number of seconds entered</li>
    <li><span class="keyword">equals: </span>Allows you to search for calls where the response time equals that entered</li>
    <li><span class="keyword">is not equal to: </span>Allows you to search for calls where the response time differs to that entered</li>
</ul>

<h5>Trunk access code</h5>

<p>This filter allows you to search for calls that used a particular trunk 
access routing code. The Trunk access code filter is presented below:</p>

<img class="screenshot naked" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/trunk_access_code_exmpl.png" alt="Trunk access code" />

<p>You can select one of the following options:</p>

<ul>
    <li><span class="keyword">equals: </span>To find calls using only this trunk access code</li>
    <li><span class="keyword">is not equal to: </span>To find every call that went out not using this trunk access code</li>
    <li><span class="keyword">begins with: </span>To find calls that went out over a trunk access code that began with these digits</li>
    <li><span class="keyword">does not begin with: </span>To find calls that went out over any trunk access code excluding those that began with the digits entered</li>
    <li><span class="keyword">ends with: </span>To find calls over any trunk access code ending with specific digits</li>
    <li><span class="keyword">does not end with: </span>To find calls over any trunk access code that does not end with specific digits</li>
    <li><span class="keyword">contains: </span>To find calls over any trunk access code where you only have a portion of the number</li>
    <li><span class="keyword">does not contain: </span>To find a call over any trunk access code which does not certain numbers or portions of numbers</li>
</ul>

<p>To add the filter, simply choose the relevant filter and press the <span class="button">Add</span> button to add to the report.</p>

<h5>Added Filters</h5>

<p>Once your filters are added, they will appear under the <span class="reference">Filters</span> section, as shown below:</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/filters_2.png" alt="Added filters" />

<h5>Delete a Filter</h5>

<p>In order to delete a filter, just select it with your mouse and click on the <img class="icon" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/red_delete_button.png"> button above it, as shown below:</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/filters_3.png" alt="Delete filter" />

NOTE: You may add more than one Filter to any report.

<h4>Options</h4>

<p>Unlike Filters, Options differ depending on the report being run. The options available for the Call geography report are shown below:</p>

<img class="screenshot border" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/options_call_geography.png" alt="Options" />

<p>Upon selecting the Option, then click on the <span class="button">Add</span> button to add this option or just select the <span class="button">Close</span> button if you no longer want to include this Option.</p>

<p>A list with the available options for the Call geography report can be seen below:</p>

<h5>Exclude transfers</h5>

<p>Select this option if you would like to exclude transferred calls when running this report.</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/exclude_transfers.png" alt="Exclude transfers" />

<p>As shown above, you have the following two options:</p>

<ul>
	<li><span class="keyword">Yes: </span>When this option is selected, all transferred calls are excluded in the results</li>
	<li><span class="keyword">No: </span>When this option is selected, transferred calls are included as standard</li>
</ul>

<p>Once your option is selected, press the <span class="button">Add</span> button to add it to the report.</p>

<h5>Exclude weekends</h5>

<p>This gives you the option of excluding weekend calls from any results shown. To exclude weekend calls, simply select <span class="keyword">Yes</span> as your option.</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/exclude_weekends.png" alt="Exclude weekends" />

<p>As shown above, you have the following two options:</p>

<ul>
	<li><span class="keyword">Yes: </span>When this option is selected, weekends calls are normally excluded from the report</li>
	<li><span class="keyword">No: </span>Select this option to include weekend calls in reports</li>
</ul>

<p>Once your option is selected, press the <span class="button">Add</span> button to add it to the report.</p>

<h5>Sort results by</h5>

<p>When running this report, you may want to order the results to suit. You can select the criteria by which you want to order the results from the list as shown below:</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/sort_results_call_geography.png" alt="Sort results by" />

<ul class="content">
	<li><span class="keyword">Charge band: </span>The chargeband that calls are allocated to.</li>
	<li><span class="keyword">% of calls: </span>The % of calls allocated to the charge band alongside.</li>
	<li><span class="keyword">Number of calls: </span>The number of calls allocated to the charge band alongside.</li>
	<li><span class="keyword">% of total duration: </span>The % of total duration allocated to the charge band alongside.</li>
	<li><span class="keyword">Average duration: </span>The average duration of calls allocated to the charge band alongside.</li>
	<li><span class="keyword">Total duration: </span>This will sort results by total duration</li>
	<li><span class="keyword">% of cost: </span>The % of call costs allocated to the charge band alongside.</li>
	<li><span class="keyword">Average cost: </span>The average cost of calls allocated to the charge band alongside.</li>
	<li><span class="keyword">Total cost: </span>The total cost of calls allocated to the charge band alongside.</li>
	</ul>

<p>Once your option is selected, press the <span class="button">Add</span> button to add it to the report.</p>

<h5>Sort order</h5>

<p>Decide if you would like the results displayed in ascending or descending order.</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/sort_order.png" alt="Sort order" />

<p>You may choose to order the results in either ascending or descending order. Note that all web reports have clickable headers
so you can reorder on-the-fly. However for other report formats e.g. PDF, it's best to decide on the Sort order before running.</p>

<ul>
	<li><span class="keyword">Ascending: </span>:Results are ordered lowest first</li>
	<li><span class="keyword">Descending: </span>Results are ordered highest first</li>
</ul>

<p>Once your option is selected, press the <span class="button">Add</span> button to add it to the report.</p>

<h5>Ignore missed</h5>

<p>You may choose to ignore missed calls below a defined time e.g. 2 seconds. Because the ring time is so short, these calls are difficult to actually answer and therefore you may want to exclude from the Call geography report.</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/ignore_missed.png" alt="Ignore missed" />

<p>As shown above, you have the option to insert the number of seconds above which your missed calls will be ignored.</p>

<p>Once your option is selected, press the <span class="button">Add</span> button to add it to the report.</p>

<h5>Audio only</h5>

<p>This option allows you to display only calls that have an associated voice recording in the results.</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/audio_only.png" alt="Audio only" />

<p>As shown above, you have the following two options:</p>

<ul>
	<li><span class="keyword">Yes: </span>The report results will only show calls with an audio file attached</li>
	<li><span class="keyword">No: </span>The report excludes all calls with audio attached</li>
</ul>

<p>Once your option is selected, press the <span class="button">Add</span> button to add it to the report.</p>

<h5>Notes only</h5>

<p>This option allows you to display only calls that have an associated note in the results.</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/notes_only.png" alt="Notes only" />

<p>As shown above, you have the following two options:</p>

<ul>
	<li><span class="keyword">Yes: </span>The report results will only show calls with a note attached</li>
	<li><span class="keyword">No: </span>The report excludes all calls with a note attached</li>
</ul>

<p>Once your option is selected, press the <span class="button">Add</span> button to add it to the report.</p>

<h5>Scored only</h5>

<p>This option allows you to limit the search to scored calls only.</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/scored_only.png" alt="Scored only" />

<p>As shown above, you have the following two options:</p>

<ul>
	<li><span class="keyword">Yes: </span>The report results will only show calls with a score attached i.e. calls that have been scored</li>
	<li><span class="keyword">No: </span>The report excludes all calls with a score attached. i.e. all calls that have not been scored</li>
</ul>

<p>Once your option is selected, press the <span class="button">Add</span> button to add it to the report.</p>

<h5>Added Options</h5>

<p>Once your options are added, they will appear under the <span class="reference">Options</span> section, as shown below:</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/options_2.png" alt="Added Options" />

<h5>Delete an Option</h5>

<p>In order to delete an option, just select it with your mouse and click on the <img class="icon" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/red_delete_button.png"> button above it, as shown below:</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/options_3.png" alt="Delete Options" />

NOTE: You may add more than one Option to any report.

<h2>Creating the report</h2>

<p>When you have chosen a reporting period, and are happy with your selections, you have two options:</p>

<ul>
	<li>Run the report now</li>
	<li>Schedule for future delivery</li>
</ul>

<p>To choose your preferred option, select the appropriate button.</p>

<p>If you choose to run the report now, click the <span class="button">Run now</span> button, as shown below. The results will appear immediately in your
chosen format.</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/run_report.png" alt="Run report" />

<p>To schedule the report for delivery at a later date, follow the instruction given on the <a href="Schedule a report">Schedule a report</a> section.</p>

<h2>Call geography - The results</h2>

<p>When selecting <span class="reference">Web</span> as the output format, this report will appear as below.</p>

<p>The Web format allows for complete flexibility when viewing any report. To view details of any filters or selection parameters used in creating this report, simply click on <span class="link">About this report</span> at the top right of the page.</p> 

<p>As with all reports, the header of the report includes the report title, any name you may have given to it, and the date and
time it was run.</p>

<img class="screenshot" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/call_geography_1.png" alt="Call geography" />

<p>All headers are clickable allowing you re-arrange the report layout in seconds, to sort the calls in ascending or decending order based on the header clicked.</p>

<p>The final report consists of three pie charts, and a table.</p>

<h4>Pie charts</h4>
<ul>
	<li>The left-hand pie chart shows the amount of calls to the various destinations</li>
	<li>The centre graph shows the time spent on calls to each location</li>
	<li>The right-hand chart shows the cost of calls to each destination.</li>
</ul>

<h4>Table</h4>

<p>This shows in detail the amount of calls that were made to the specific destination, also expressed as a percentage of all calls, along with the average, total and percentage costs associated with each destination.</p> 

<p>The headers of the table are as follows:</p>

<table class="confluenceTable">
	<tbody>
		<tr>
			<th class="confluenceTh" width=126>Header</th>
			<th class="confluenceTh">Description</th>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Charge band</b></td>
			<td class="confluenceTd">The <span class="reference">Charge band</span> represents the area dialled, International, Local, National, Other and Personal /Mobile.
				<p>All chargebands have hyperlinks to allow you to drill-down further to see which site, department, extension or person made the call.</p>
			</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>% of calls</b></td>
			<td class="confluenceTd">This column shows the number of calls as a percentage of the total calls made. To re order, simply
click on the header to alternate between descending and ascending.
			</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Number of calls</b></td>
			<td class="confluenceTd">The number of calls lists the actual number of calls made to each of charge band shown with the total
number of calls for that period showing on the summary line. To re order, simply click on the header and the report will alternate between the charge band with the most calls and the charge
band with the least calls.
			</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>% of total duration</b></td>
			<td class="confluenceTd">The % of total duration shows the number of calls as a percentage of the total  duration of calls made. e.g. 1%
of the dotal duration was spent on International calls.
			</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Average duration</b></td>
			<td class="confluenceTd">This column shows the average duration spent on calls to this charge band. This is ideal if
you are speaking to your carrier about issues like call capping, particularly if the average call duration
is quite high. You can reorder to sort in descending and ascending order of average call duration by
clicking on the header.
			</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Total duration</b></td>
			<td class="confluenceTd">This column shows the total amount of time spent on calls to a particular chargeband. To re-order, simply click on the header to 
				alternate between descending and ascending.
			</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>% of total cost</b></td>
			<td class="confluenceTd">The percentage of total cost allows you to see what percentage of the total cost of all calls was spent on calls to this chargeband.
			</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Average cost</b></td>
			<td class="confluenceTd">It shows the average cost of calls made to this chargeband. To re-order, simply click on the header to alternate between descending and ascending.
			</td>
		</tr>
		<tr>
			<td class="confluenceTd"><b>Total cost</b></td>
			<td class="confluenceTd">This column shows the total cost of calls made to this chargeband. To re-order, simply click on the header to alternate between descending and ascending.
			</td>
		</tr>
	</tbody>
</table>

<p>The summary line at the foot of the table shows the total number of calls included in the report, the total duration of calls, average and total costs.</p>

<p>If you would like to go back and view any report for a larger section of the organisation, simply click on the appropriate link in the breadcrumb as shown below:</p>

<img class="screenshot naked" src="http://www.tri-line.com/common/img/documentation/tim_enterprise/breadcrumb.png" alt="Breadcrumbs" />