GEC BTEX

...

Configuring your SMDR output

...

The GEC BTEX phone system sends SMDR information via a serial connection. You need to directly connect a serial cable from the GEC BTEX phone system to the PC that netpbx is installed and running on.

For more information about the output and configuration of your SMDR data, please contact your phone system maintainer.

<a id="Install NetPBX"></a>

Installing NetPBX

The GEC BTEX phone system sends SMDR information via a serial connection. To collect the call logging data from the serial port and send it to TIM Plus, you will first need to install the NetPBX software. For setup instructions, click on the link below:

Install and configure NetPBX

<a id="Configure TIM Plus"></a>

...

Once NetPBX is configured and collecting data, log on in to TIM Plus as usual and apply perform the following settingssteps below:

1. Click on the Directory tab.
2. Select Choose the site configured during the setup wizard you want to configure and clickProperties.
   

   Screenshotmacro
   Border false URL http://docs.call-logger.com:8090/download/attachments/4817056/gec_btex_1.png

3. Within In the Site Properties window, select GEC BTEX 600S from the PBX model drop-down list.
4. In the Connection method field, select No connection required from the drop-down list.
5. Click on the Save button to apply the settings.