You are viewing an old version of this page. View the current version.
Compare with Current ·
View Page History
These instructions help you configure your Cisco UCME / UC500 to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.
Connection Type
TIM Plus captures RADIUS packets from this PBX.
Support Files
Cisco UCME - RADIUS.TDT
Cisco UCME - RADIUS.TDS
Required Tasks
Set up RADIUS events in the UCME
Configure the AXL sync
Configure TIM Plus to capture RADIUS packets
Login to your Cisco UCME / UC500 via telnet, as shown below:
Labels: