These instructions help you configure your Siemens HiPath 4000 phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.
Connection Type
TIM Enterprise establishes a TCP connection to this PBX.Support Files
Siemens HiPath 4000.TDTSiemens HiPath 4000.TDS
Required Tasks
Configure the SMDR outputConfigure TIM Enterprise
Configuring your SMDR output
By default, the SMDR output of a Siemens HiPath 4000 phone system is not enabled. For information about how to configure the output for incoming, outgoing and internal calls, contact your system maintainer.
Configuring TIM Enterprise
Follow the steps below to configure TIM Enterprise to collect the SMDR data from your Siemens HiPath 4000:
- Click on the tab.
- Choose the PBX object you want to configure and click Properties.
- A new window will open. In the Siemens HiPath 4000 from the Data format list and tick the Keep a local backup of data box, as shown below:
tab, select - In the Establish TCP connection to PBX from the Connection method list. tab, select
- In the Host field, enter the IP address of your Siemens HiPath 4000.
- In the Port field, enter 9000.
- Leave the Username and Password fields blank.
- In the IP script field, select Generic Simple from the drop-down list.
- Click on the
button to apply the settings.
These instructions should assist in configuring your Siemens HiPath 4000 to work with TIM Enterprise. If you are not familiar with PBX configuration, please contact your system maintainer.
Connection information | Description |
---|---|
Connection type | IP |
IP method | TCP/IP connection: The Siemens HiPath 4000 sends SMDR information via TCP/IP on a TCP port. TIM Enterprise will connect to the IP address of Siemens HiPath 4000. |
For your SMDR configuration, you will need to speak to your system maintainer to enable SMDR output.
Configuring TIM Enterprise
Below you will find steps on how to configure TIM Enterprise to connect to your Siemens HiPath 4000 to receive SMDR:
- Browse to TIM Enterprise as normal and login with your credentials.
- Click on the tab.
- Go the the point in the Directory where you need to add the PBX Object and add a PBX with the name 'Siemens HiPath 4000'.
- Left-click on it and select .
- From the Siemens HiPath 4000 from the PBX model list. settings tab select
- In the Establish TCP connection to PBX from the Connection method list. tab select
- In the Host field enter in the IP Address of your Siemens HiPath 4000 e.g. 192.168.1.1.
- In the Port field enter in 9000.
- Leave the Username and Password fields blank.
- In the IP script field select Generic Simple.
- Finally, click on the button.