You are viewing an old version of this page. View the current version.
Compare with Current ·
View Page History
These instructions help you configure your Siemens HiPath 4000 phone system to work with TIM Enterprise. Contact your system maintainer if you are not familiar with the configuration of your PBX.
Connection Type
TIM Enterprise establishes a TCP connection to this PBX.Support Files
Siemens HiPath 4000.TDTSiemens HiPath 4000.TDS
Required Tasks
Configure the SMDR outputConfigure TIM Enterprise
Configuring your SMDR output
By default, the SMDR output of a Siemens HiPath 4000 phone system is not enabled. For information about how to configure the output for incoming, outgoing and internal calls, contact your system maintainer.
Configuring TIM Enterprise
Follow the steps below to configure TIM Enterprise to collect the SMDR data from your Siemens HiPath 4000:
- Click on the tab.
- Choose the PBX object you want to configure and click Properties.
- A new window will open. In the Siemens HiPath 4000 from the Data format list and tick the Keep a local backup of data box, as shown below:
tab, select - In the Establish TCP connection to PBX from the Connection method list. tab, select
- In the Host field, enter the IP address of your Siemens HiPath 4000.
- In the Port field, enter 9000.
- Leave the Username and Password fields blank.
- In the IP script field, select Generic Simple from the drop-down list.
- Click on the
button to apply the settings.
Labels: