These instructions help you configure your SwyxWare phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.
<a id="Configure the SMDR output"></a> |
Configuring your SMDR output
Below you will find steps on how to configure the SwyxWare to output the SMDR data to a file in a specific location:
- Log in to your SwyxWare Administration tool.
- Right-click on the Swyx server you want to configure and click on the Properties button.
- Now, you should be able to see the properties window, click on the Call Detail Records tab.
- Click on the Call Detail Records into Text File radio button.
- In the Save to Folder field enter in the following: \program files\tri-line\tim plus\spool\. If you are using a mapped driver enter in the driver letter.
- In the File Name field enter the following: data.{sitecode}. You can check the site code by browsing to TIM Plus, click on the Directory tab and hover over the site and the site code will appear.
- Click on the OK button and close the SwyxWare Administration tool.
Below, you can find an example of the SwyxWare Administration properties window:
<a id="Configure TIM Plus"></a> |
Configuring TIM Plus
Below you will find steps on how to configure TIM Plus to receive the SMDR data from your SwyxWare:
- Log on to TIM Plus and click on the Directory tab.
- Select the site configured during the setup wizard and click Properties.
- Within the Site Properties window, select SWYX V6 from the PBX model drop-down list.
- In the Connection method field, select No connection required from the drop-down list.
- Click on the Save button to apply the settings.