<p>The filters option allows you to add one or more filters to the report 
to allow you to sift through information in more detail. To add a 
filter, simply choose the relevant filter and press the <span class="button">Add</span> button to add to the report.</p>

<img src="http://www.tri-line.com/common/img/documentation/tim_enterprise/add_filter.png" alt="Add filter" />

NOTE: You may add more than one filter to any report.

<h4>Account code</h4>

<p>If your telephone system provides the ability to add account codes, you 
may filter by entering the account code here. If more than one account 
code needs to be entered, simply comma separate.</p>

<p>The default option is to search for calls where there is an exact match 
for the account code entered i.e. <span class="reference">'equals'</span>, however you do have several 
other options as presented below:-</p>

<ul>
    <li><b>equals: </b>to find only exact matches</li>
    <li><b>is not equal to: </b>to excluding calls to a particular number or beginning with a particular sequence of numbers</li>
    <li><b>begins with: </b>to find calls to a particular location e.g. 00 for International</li>
    <li><b>does not begin with: </b>to exclude certain calls e.g. 07 for UK  mobile/personal</li>
    <li><b>ends with: </b>when you want to find calls to a specific DDI</li>
    <li><b>does not end with: </b>calls to everywhere except a specific number range</li>
    <li><b>contains: </b>to find a call where you only have a portion of the number</li>
    <li><b>does not contain: </b>to find a call where you need to exclude certain numbers or portions of numbers</li>
</ul>

<p>To add the filter, simply choose the relevant filter and press the <span class="button">Add</span> button to add to the report.</p>

<h4>Carrier</h4>

<p>The carrier is the tariff table used to cost the call. You can choose to
 filter all calls by a particular carrier e.g. if you want to check a 
recent bill from that carrier. Alternatively, you may want to look at 
all calls not routed over a particular carrier. To do this, simply 
select from the above:-</p>

<ul>
	<li><b>equals: </b>calls equal to the value entered here</li>
	<li><b>is not equal to</b>calls not equal to the value here e.g. calls that were not free i.e. 0.00</li>
</ul>

<p>To add the filter, simply choose the relevant filter and press the <span class="button">Add</span> button to add to the report.</p>

<h4>Cost</h4>

<p>The cost, if any, incurred by the call (shown in local currency). You can filter by cost to show calls:-</p>

<ul>
	<li><b>greater than: </b>all calls above the value entered here</li>
	<li><b>less than: </b>all calls below the value entered here</li>
	<li><b>equals: </b>calls equal to the value entered here</li>
	<li><b>is not equal to: </b>calls not equal to the value here e.g. calls that were not free i.e. 0.00</li>
</ul>

<p>To add the filter, simply choose the relevant filter and press the <span class="button">Add</span> button to add to the report.</p>

<h4>Dialled number</h4>

<p>When filtering by dialled number, enter the number you want to filter by here, including any international prefixes.</p>

<ul>
    <li><b>equals: </b>to find only exact matches</li>
    <li><b>is not equal to: </b>to excluding calls to a particular number or beginning with a particular sequence of numbers</li>
    <li><b>begins with: </b>to find calls to a particular location e.g. 00 for International</li>
    <li><b>does not begin with: </b>to exclude certain calls e.g. 07 for UK  mobile/personal</li>
    <li><b>ends with: </b>when you want to find calls to a specific DDI</li>
    <li><b>does not end with: </b>calls to everywhere except a specific number range</li>
    <li><b>contains: </b>to find a call where you only have a portion of the number</li>
    <li><b>does not contain: </b>to find a call where you need to exclude certain numbers or portions of numbers</li>
</ul>

<p>To add the filter, simply choose the relevant filter and press the <span class="button">Add</span> button to add to the report.</p>

<h4>LCR Code</h4>

<p>If you use least cost routing, you can select the carrier you would like
 to report on here. Alternatively you can choose to exclude certain 
carriers.</p>

<ul>
    <li><b>equals: </b>to find only exact matches</li>
    <li><b>is not equal to: </b>to find any calls over alternative carriers</li>
    <li><b>begins with: </b>to find calls for a partial LCR code</li>
    <li><b>does not begin with: </b>to exclude calls over certain carriers</li>
    <li><b>ends with: </b>exclude LCR codes ending with specific digits</li>
    <li><b>does not end with: </b>where the LCR code does not end with specific digits</li>
    <li><b>contains: </b>to find call on an LCR where you only have a portion of the number</li>
    <li><b>does not contain: </b>to find a call on LCR excluding certain numbers or portions of numbers</li>
</ul>

<p>To add the filter, simply choose the relevant filter and press the <span class="button">Add</span> button to add to the report.</p>

<h4>Start time</h4>

<p>Start time is defined as the exact time of day the call started, as 
output by your telephone system.  You may choose to filter for any of 
the following:-</p>

<ul>
    <li><b>is greater than: </b>filter for calls that started after this time e.g. after 18:00</li>
    <li><b>is less than: </b>filter for calls that started before this time e.g. before 07:00</li>
    <li><b>equals: </b>filter for calls that started at exactly this time</li>
    <li><b>is not equal to: </b>filter for calls outside a particular time</li>
</ul>

<p>To add the filter, simply choose the relevant filter and press the <span class="button">Add</span> button to add to the report.</p>

<h4>Call Type</h4>

<p>This allows you to define the type of call you would like to report on.
 You can choose between the following:-</p>

<ul>
    <li><b>equals: </b>to find only exact matches</li>
    <li><b>is not equal to: </b>to exclude calls that don't match</li>
</ul>

<p>Then you can define the actual type of call. e.g. to see all abandoned 
DDI calls, choose <span class="reference">'equals'</span> and select <span class="reference">'Missed DDI only'</span> from drop-down list.  
This will show how many channels had 'missed' or 'abandoned' calls at any one time.</p>

<p>To add the filter, simply choose the relevant filter and press the <span class="button">Add</span> button to add to the report.</p>

<h4>CLI</h4>

<p>The telephone number of the caller if presented known as CLI (Caller 
Line Identification). If you want to search for calls from a particular 
CLI or look for all calls excluding those from a specific CLI, filters 
should be used as follows:</p>

<ul>
    <li><b>equals: </b>to find only exact matches</li>
    <li><b>is not equal to: </b>to find every call except those from that CLI</li>
    <li><b>begins with: </b>to find calls that begin with similar CLI numbers</li>
    <li><b>does not begin with: </b>to exclude calls from specific CLI's</li>
    <li><b>ends with: </b>exclude CLI numbers ending with specific digits</li>
    <li><b>does not end with: </b>where the CLI does not end with specific digits</li>
    <li><b>contains: </b>to find call from a CLI where you only have a portion of the number</li>
    <li><b>does not contain: </b>to find a call from a CLI excluding certain numbers or portions of numbers</li>
</ul>

<p></p>

<p></p>

<p></p>

<p></p>

<p></p>

<p></p>

<p></p>

<p></p>

<p></p>