These instructions help you configure your Cisco UCME / BE4000 / UC500 to work with TIM Enterprise. Contact your system maintainer if you are not familiar with the configuration of your PBX.
![](/plugins/servlet/confluence/placeholder/macro?definition=e3BieHN1bW1hcnk6U3VwcG9ydGZpbGVzMT0gQ2lzY28gVUNNRSAtIFN5c0xvZy5URFR8U3VwcG9ydGZpbGVzMj0gQ2lzY28gVUNNRSAtIFN5c0xvZy5URFN8Q29ubmVjdGlvbj1TeXNMb2cgY29ubmVjdGlvbnxSZXF1aXJlZFRhc2sxPUNvbmZpZ3VyZSBDaXNjbyBBWEwgc3luY3xSZXF1aXJlZFRhc2syPUNvbmZpZ3VyZSBVQ01FIHRvIHNlbmQgU3lzTG9nIGV2ZW50c3xSZXF1aXJlZFRhc2szPUNvbmZpZ3VyZSBUSU0gRW50ZXJwcmlzZSB0byBjYXB0dXJlIFN5c0xvZyBwYWNrZXRzfQ&locale=en_GB&version=2)
<a id="Configure Cisco AXL sync"></a> |
Configuring Cisco AXL sync
Follow the steps below to configure TIM Enterprise to synchronise with the directory of your Cisco UCME:
- Click on the Directory tab.
- Go to the Directory level where you want to sync the UCME files and add a new Directory Sync object. Enter a name for the object and click on the Add button, as shown below:
![](/plugins/servlet/confluence/placeholder/macro?definition=e3NjcmVlbnNob3RtYWNybzpCb3JkZXI9ZmFsc2V8VVJMPS9kb3dubG9hZC9hdHRhY2htZW50cy8xMzI3MTA5NS9jaXNjb191Y21lXzYucG5nfQ&locale=en_GB&version=2)
- Left-click on the newly-created object and select Properties.
- In the Directory type drop-down list, select Cisco UCME.
- In the Host name field, enter the IP address of your UCME.
- In the Host port field, enter the port number of the IOS service, e.g. 23 .
- In the Username field, enter the username of the IOS login that can perform synchronisation.
![](/plugins/servlet/confluence/placeholder/macro?definition=e3NjcmVlbnNob3RtYWNybzpCb3JkZXI9ZmFsc2V8VVJMPS9kb3dubG9hZC9hdHRhY2htZW50cy8xMzI3MTA5NS9jaXNjb191Y21lXzMucG5nfQ&locale=en_GB&version=2)
- Click on Set password button and enter the password of the IOS login that can perform synchronisation.
![](/plugins/servlet/confluence/placeholder/macro?definition=e3NjcmVlbnNob3RtYWNybzpCb3JkZXI9ZmFsc2V8VVJMPS9kb3dubG9hZC9hdHRhY2htZW50cy8xMzI3MTA5NS9jaXNjb191Y21lXzQucG5nfQ&locale=en_GB&version=2)
- Click on the Save button to apply the changes.
<a id="Configure UCME to send SysLog events"></a> |
Configuring UCME to send SysLog events
Use Telnet to connect to the IP address of your UCME as shown below:
![](/plugins/servlet/confluence/placeholder/macro?definition=e3NjcmVlbnNob3RtYWNybzpCb3JkZXI9ZmFsc2V8U2hhZG93PWZhbHNlfFVSTD0vZG93bmxvYWQvYXR0YWNobWVudHMvMTIxNTgxODMvY2lzY29fdWNtZV80LnBuZ30&locale=en_GB&version=2)
Once connected, enter the following commands to enable the UCME to send SysLog events to TIM Enterprise:
Step | IOS commands | Description |
---|
1 | enable | Causes the UCME to enter EXEC mode. Type your EXEC password if requested |
2 | conf t | Enters the global configuration mode |
3 | aaa new-model | Enables aaa accounting mode |
aaa accounting connection h323 start-stop group SysLog |
gw-accounting syslog |
acct-template callhistory-detail |
4 | logging 192.168.0.1 | Specifies the IP address of TIM Enterprises's SysLog server, to which CDR data will be sent, e.g. 192.168.0.1 |
5 | end | Exits configuration mode |
6 | wr | Saves changes |
<a id="Configure TIM Enterprise to capture SysLog packets"></a> |
Configuring TIM Enterprise to capture SysLog packets
Follow the steps below to configure TIM Enterprise to receive SysLog data from your UCME:
- Click on the Directory tab.
- Locate the PBX object you want to configure in the Directory, right-click on it and select Properties.
- A new window will open, displaying the general properties of your PBX object. Select Cisco UCME - SysLog from the Data format list and tick the Keep a local backup of data box, as shown below:
![](/plugins/servlet/confluence/placeholder/macro?definition=e3NjcmVlbnNob3RtYWNybzpCb3JkZXI9ZmFsc2V8VVJMPS9kb3dubG9hZC9hdHRhY2htZW50cy8xMzI3MTA5Ny9jaXNjb191Y21lXzcucG5nfQ&locale=en_GB&version=2)
- Click on the Connection tab and select SysLog connection from the Connection method list.
- In the Client IP field, enter the IP address of your UCME.
![](/plugins/servlet/confluence/placeholder/macro?definition=e3NjcmVlbnNob3RtYWNybzpCb3JkZXI9ZmFsc2V8VVJMPS9kb3dubG9hZC9hdHRhY2htZW50cy8xMzI3MTA5Ny9jaXNjb191Y21lXzgucG5nfQ&locale=en_GB&version=2)
- Click on the Save button to apply the settings.