<p>These instructions should assist in configuring your Siemens Hicom to work with TIM Enterprise. If you are not familiar with PBX configuration, please contact your system maintainer.</p> <table class="confluenceTable"> <tbody> <tr> <th class="confluenceTh" width=158>Connection information</th> <th class="confluenceTh">Description</th> </tr> <tr> <td class="confluenceTd"><b>Connection type</b></td> <td class="confluenceTd">IP. </td> </tr> <tr> <td class="confluenceTd"><b>IP method</b></td> <td class="confluenceTd">TIM Enterprise will connect to the IP address of your Siemens Hipath 4000 on a specifc TCP port. </td> </tr> <tr> <td class="confluenceTd"><b>TCP/IP connection</b></td> <td class="confluenceTd">The Siemens Hipath 4000 sends SMDR information via TCP/IP on a TCP port. TIM Enterprise will connect to the IP address of Siemens Hipath 4000. </td> </tr> <tr> <td class="confluenceTd"><b>SMDR configuration</b></td> <td class="confluenceTd">You will need to speak to your system maintainer to enable SMDR output, they will need to tell you the IP address and TCP port to connect to. </td> </tr> </tbody> </table> <h2>Configuring TIM Enterprise</h2> <p>Below you will find steps on how to configure TIM Enterprise to connect to your Siemens Hipath 4000 to receive SMDR:</p> <ol> <li>Browse to TIM Enterprise as normal and login with your credentials.</li> <li>Click on the <span class="button" id="list">Directory</span> tab.</li> <li>Go the the point in the Directory where you need to add the PBX Object and add a PBX with the name 'Siemens Hipath 4000'.</li> <li>Left-click on it and select <span class="button" id="list">Properties</span>.</li> <li>From the <span class="button" id="list">General</span> settings tab select <span class="keyword">Siemens HiPath 4000</span> from the PBX model list.</li> <img src="http://www.tri-line.com/common/img/documentation/tim_enterprise/pbx/siemens_hipath_4000_1.png" alt="Siemens Hipath" /> <li>In the <span class="button" id="list">Connection</span> tab select <span class="keyword">Establish TCP connection to PBX</span> from the <span class="reference">Connection method</span> list.</li> <li>In the <span class="reference">Host</span> field enter in the IP address e.g. 192.168.1.1.</li> <li>In the <span class="reference">Port</span> field enter in <span class="keyword">9000</span>.</li> <li>Leave the <span class="reference">Username</span> and <span class="reference">Password</span> fields blank.</li> <li>In the <span class="reference">IP script</span> field select <span class="keyword">Generic Simple</span>.</li> <li>Finally, click on the <span class="button" id="list">Save</span> button.</li> <img src="http://www.tri-line.com/common/img/documentation/tim_enterprise/pbx/siemens_hipath_4000_2.png" alt="Siemens Hipath" /> </ol> |