Skip to end of metadata
Go to start of metadata
You are viewing an old version of this page. View the current version. Compare with Current ·  View Page History

Introduction

The Call Scoring report provides a comprehensive analysis of previously scored calls, enabling you to quickly and easily evaluate the answers to them. All questions are summarised in a clear, easy-to-understand format and are shown separately, grouped into their respective categories.

TIM Plus allows you to create your own score cards and rate any call for evaluation purposes. The scores can be based on any combination of questions with the following answers:

  • Yes/No
  • A range
  • Multiple choice


An example of a scoring card can be seen below:


Running the report

On the Reports screen, click on Call geography in the reports list and then press the Select this report button.


A new window will appear, where you can select the criteria for your report.

Selecting the reporting period

Every report requires a period to run over. This is generally defined as the "Reporting period".


There are several preset periods that can be selected from a drop-down list. The predefined periods are based on a standard Gregorian calendar and are defined as follows:-

PeriodDescription
TodayThe start and end dates are set to the current date. The start time is set to 00:00:00 and the end time to 23:59:59.
YesterdayThe start and end dates are set to the current date minus one day. The start time is set to 00:00:00 and the end time to 23:59:59.
This weekThe start date is set to the first day (normally Monday) of the current week. The end date is set to the current day. The start time is set to 00:00:00 and the end time to the current time.
Last weekThe start date is set to the date of the last Monday, and the end date is set to the start date plus seven days. The start time is set to 00:00:00 and the end time to 23:59:59.
This monthThe start date is set to the first day of the current month. The end date is set to the current day. The start time is set to 00:00:00 and the end time to the current time.
Last monthThe start date for this period is set in three stages. The day is set to 01, the month is set to the current month minus one, or in the case of January, it is set to 12. The year is set to the current year, unless it is a new year, in which case the year is reduced by one. The start and end times are set to 00:00:00 and 23:59:59 respectively.
This yearThe start date is set to the first day of the first month of the current year, whilst the end date is set to today's date. The start and end times are set to 00:00:00 and 23:59:59 respectively.
All callsThe start and end dates and times are set to the date and time of the first and last call in the entire call database, respectively.
Custom periodEnter the start and end dates and times into the boxes below. The start and end times are linked to their respective dates.

If you want to be more specific, you can choose the Custom period from the drop-down list. This option will allow you to define the Start date and End date yourself, as well as the Start time and End time of the calls you want to report on.


When the report is executed, the reporting engine will substitute the start and end dates based on the current date or the relevant selection made by the user.

Once you have set the report's period, click on theNextbutton to set more of the report's parameters or select theFinishbutton to run the report.

Selecting the reporting entity

The reporting entity paramater allows you to select which part of your organisation you want to run the report for (site, extension group, channels or individual extensions).


Site

TIM Plus will allow you to log information from up to five sites. If you want to report on a particular site, select your preferred site from the drop-down list, alternatively leave the default settings as All sites.

Sites
All sites

The username and password you have been allocated might be restricted to a specific site or group. If you need additional permissions, please contact your system administrator.

Group

There is no limit to the number of groups you can create on one site. Groups, like sites are available as a drop-down list. You can choose to report on a specific group or leave the default setting as All groups.

Groups
All groups

Please note that the drop-down list for each group will appear only if a site has already been selected.

User

Once a site and group has been selected, you can also choose to report on a particular user from the drop-down list, or you can leave the default setting as All users.

User
All users

Once you have set the report's entities, click on theNextbutton to set more of the report's features or select theFinishbutton to run the report.

Selecting the report filters

This option allows you to filter out certain calls from your results, by selecting the values of the parameters. 


These filters allow you to be very specific, when deciding the call information you would like to display in the final report.If you do not want to select any filters, simply press theNextbutton to skip.

Please find a brief description of all filters below:

Call type

This filter allows you to define the type of call you would like to report on. If you would like to report on all calls, leave the default setting as All calls.

Call type
All calls

If you want to report on one call type in particular, expand the drop-down list and select from the available options.

CLI

The Caller Line Identification (CLI) is a phone number that calls your organisation. This is sometimes withheld by the person making the call.

You may choose to report on calls from a particular CLI or from numbers beginning with a particular CLI. For example, for calls from Tri-Line you would enter 02072652600.

CLI
02072652600

This filter accepts the comparison operators ! and * (e.g. to exclude calls from Tri-Line, you would use !020726526*). To report on more than one CLI, user a comma to separate the entries.

Dialled number

To filter calls to a specific number, type the number that was dialled in the box provided. The dialled number can be a number that you dial out, or a DDI number within your organisation that someone dials in to get to a particular extension.

To filter calls to a specific area, a partial number may be entered (e.g. 0033, for calls to France). 

Dialled number
0033

This filter accepts the comparison operators ! and (e.g. to exclude calls to 0207 265, enter !0207265* ).

Duration

To filter calls above or below a particular duration, enter the number of seconds and the relevant symbol in the box provided. This filter allows you to specify a range (-) or use comparison operators (>, <, ! and *).

Duration
>1800

In the above example, the filter will look for calls longer than 1800 seconds (30 minutes). Alternatively, you may want to exclude calls below a certain threshold (e.g. below 3 seconds).

Selecting the report options

This section allows you to further narrow down your report results, by excluding certain types of calls or sorting the results in a particular manner. The filters are fairly self-explanatory. For example, if you would like to exclude weekend calls from the report, simply tick the option to exclude weekend calls. If you would like to ignore missed calls shorter than a specific duration, simply enter the duration in the box.


Exclude weekends

If you would like to exclude weekend calls from the search results, simply select the tick-box to exclude weekend calls.

Exclude weekends

Exclude transfers

Select this option if you would like to exclude transfers from the search results. For example if you want to see only how well calls were answered when first presented, you would choose to exclude transfers.

Exclude transfers

Hide unused

This option gives you the option of excluding unused extensions from the results shown. To exclude unused extension, simply select select the tickbox, as shown below:

Hide unused

Introduction

TIM Plus allows you to create your own score cards and rate any call for evaluation purposes. The scores can be based on any combination of questions with the following answers:

  • Yes/No
  • A range
  • Multiple choice
Call scoring

An example of a scoring card can be seen below:

Call scoring

Running the report

On the Reports screen, click on Call scoring in the reports list and then press the Select this report button.

Call scoring

The following report selection criteria window appears:

Reporting period

Every report requires a period to run over. This is generally defined as the "Reporting period".

Call scoring

There are several pre-defined periods that can be selected from a simple drop-down list as shown above.

The built-in periods are based on a standard Gregorian calendar and are defined as follows:

Period Description
Today The start date and end date is set to the current date. The default start time is set to 00:00:00 and the end time to the current time.
Yesterday The start date and end date is set to the current date minus one day. The start time is set to 00:00:00 and the end time to 23:59:59.
This week The start date is set to the Monday of the current week, whilst the end date is set to the current day. The default start time is set to 00:00:00 and the end time to the current time.
Last week The start date is set to the last Monday, whilst the end date is set to the start date plus seven days. The start time is set to 00:00:00 and the end time to 23:59:59.
This month The start date is set to the 1st day of the current month and the end date to today. The default start time is set to 00:00:00 and the end time to the current time.
Last month The start date for this period is set in three stages. The day is set to 01, the month is set to the current month minus one, or in the case of January, it is set to 12. The year is set to the current year, unless it is a new year, in which case the year is reduced by one. The start and end times are set to 00:00:00 and 23:59:59 respectively.
This year The start date is set to the first day of the first month of the current year. The end date is set to today's date. The start and end times are set to 00:00:00 and 23:59:59 respectively.
All calls The start date is set to the date of the first call in the database, whilst the end date is set to the date of the most recent call in the database. Times are also set to the times of the first and last calls in the database.
Custom period Enter the start and end dates and times into the boxes below. The start and end times are linked to their respective dates.

If you want to be more specific, you can choose the Custom period from the bottom of the drop-down list. This option will allow you to define the start date and end date yourself, as shown below. When you need to be even more specific, you can also choose a start time and end time.

Call scoring

When the report is executed, if the user has selected an in-built period, the reporting engine simply substitutes the start and end dates based on the current date and the period the user selected.

Once you have set the report's period, click on the Next button to set more of the report's features or select the Finish button to run the report.

What do you want to report on?

In addition to the reporting period, each report offers you the opportunity to define exactly what you want to report on. This is generally a site, group or user.

Site
Call scoring

TIM Plus will allow you to log information from up to five sites. If you want to report on a specific site, select that site from the drop-down list or to select all sites' data, leave it at the default All sites as shown above.

NOTE: The username and password you have been allocated may mean you are restricted to specific sites or groups. If you have any difficulty accessing other sites or group, please contact your system administrator and check that access has been enabled.
Group
Call scoring

There is no limit to the number of groups available on each site. Groups, like sites are available as a drop-down list. You can choose to select a specific group or leave at the default All groups. Please note that the drop-down list for each group can only appear if a site has already been selected.

User
Call scoring

Once a site and group has been selected, you can decide whether you would like to report on all users or select a particular user from the drop-down list as shown above.

Once you have set the report's entities, click on the Next button to set more of the report's features or select the Finish button to run the report.

Filter call information

Call scoring

You have the option of filtering the information, based on a number of call filters. These filters allow you to be very specific, when deciding the call information you would like in the final report.

If you do not want to select any filters, simply press the Next button to skip.

Please find a brief description of all filters below:

Call type

This filter allows you to define the type of call you would like to report on. If you would like to report on all calls, leave at the default All calls.

Call type
CLI

The Caller Line Identification (CLI) is the number associated with the incoming call. This is sometimes withheld by the person making the call.

You may choose to report on calls from a particular CLI or from numbers beginning with a particular CLI by entering the number in here. For example, for calls from Tri-Line you would enter in "02072652600". This filter accepts the comparison operators ! and *, e.g. to exclude calls from Tri-Line use "!020726526*".

To report on more than one CLI, simply comma separate.

CLI
Dialled number

To filter calls to a specific number, type the number in the dialled number field. To filter calls to a specific area, a partial number may be entered here e.g. "0033" for calls to France. This filter accepts the comparison operators ! and *, e.g. to exclude calls to 0207 265, enter "!0207265*".

Dialled number
Duration

To filter call above or below a particular duration, simply enter the number of seconds and the relevant symbol. This filter accepts range (-) and comparison operators (>, <, ! and *).

In the example nearby, the filter will look for calls above 1800 seconds (30 minutes). Alternatively you may want to exclude calls below a certain threshold e.g. below 3 seconds.

Duration

Specific Options

Call scoring

This section allows you to add more specific filters to your report. The filters are fairly self-explanatory. If you would like to exclude weekend calls from the report, simply tick the option to exclude weekend calls.

Exclude weekends

This option gives you the option of excluding weekend calls from any results shown. If you would like to exclude weekend calls, simply select the tickbox to exclude weekend calls.

Call scoring
Exclude transfers

Select this option if you would like to exclude transfers when running a report. For example if you were running an incoming call analysis report and wanted to see only how well calls were answered when first presented, you would choose the option on excluding transfers.

Call scoring
Hide unused

This option gives you the option of excluding unused extensions from the results shown. To exclude unused extension, simply select select the tickbox, as shown below:

Call scoring

Creating the report

When you have chosen a reporting period, and are happy with your selections, you have two options:

  • Run the report now
  • Schedule for future delivery
Call scoring

To choose your preferred option, select the appropriate button.

If you choose to run the report now, click the Run now button. The results will appear immediately in your chosen format.

To schedule the report for delivery at a later date, follow the instruction given on the Schedule a report section.

Call scoring - The results

When selecting Web as the output format, this report will appear as below.

The Web format allows for complete flexibility when viewing any report. To view details of any filters or selection parameters used in creating this report, simply click on About this report at the top right of the page.

As with all reports, the header of the report includes the report title, any name you may have given to it, and the date and time it was run.

Call scoring

The results of the call scoring report will vary depending on the type of questions used to create your scorecards.

Yes/No answers will be shown as two bars with a % allocated against the Yes/No answers.

Call scoring

Range answers will show the Minimum and Maximum scores as well as the average score.

Call scoring

Multiple choice scores will show the % allocated to each answer

Call scoring

All scores will show the total number of scores the report is based on so you can put the answers into context.

If you would like to go back and view this report for a larger section of the organisation, simply click on the appropriate link in the breadcrumb as shown below:

Breadcrumbs
Labels: