![](/s/en_GB/3145/191/_/images/icons/emoticons/warning.png)
These instructions help you configure your Cisco UCME / UC500 to work with TIM Enterprise. Contact your system maintainer if you are not familiar with the configuration of your PBX.
Connection Type
![](/download/attachments/4817021/icon_connection_syslog.gif)
Support Files
![](/download/attachments/4817021/icon_connection_file.gif)
![](/download/attachments/4817021/icon_connection_file.gif)
Required Tasks
![](/download/attachments/4817021/icon_task.gif)
![](/download/attachments/4817021/icon_task.gif)
![](/download/attachments/4817021/icon_task.gif)
Configuring UCME to send SysLog events
Use Telnet to connect to the IP address of your UCME as shown below:
Once connected, enter the following commands to enable the UCME to send SysLog events to TIM Plus:
Labels: