Skip to end of metadata
Go to start of metadata
You are viewing an old version of this page. View the current version. Compare with Current ·  View Page History

To add an extension group click on the button beneath the extension group window as displayed on the screen above. The following box will appear:

Creating an extension group

Type the name of your new extension group into the box named Extension Group e.g. 'Accounts' as shown above.

When you have done this click on the OK button. Your new group will be displayed in the Extension Group window (left-hand side of the screen).

To create further extension groups repeat the process. Note that you cannot have more than one group with the same name.

When you're done entering all of your groups, you'll end up with a screen similar to the one below:

Creating an extension group

Always remember to press the button in order for the changes to take effect. When the configuration has been saved, the changes take effect immediately. However, calls made prior to your changes will not necessarily reflect your changes, and so the system asks you what you want to do about these old calls, in the following prompt:

Creating an extension group

You will be asked to enter the date range over which calls should be updated to reflect your new extension configuration. Enter the range and press OK.

If you just want all calls to reflect the new set-up, click on the All Calls button.

To leave old calls as they are, without updating them, click on the Cancel button.

Depending on the magnitude of changes and the number of old calls you've asked to be updated, this may take some time. A progress indicator is shown in the status bar. When the update has been completed you will receive the following notification.

Test
Labels: